Vision Wide DV-1475
Image: visionwide-tech.com, Vision Wide
Key Specifications
Tool Capacity
Table Size
x axis travel
y axis travel
z axis travel
max table load
How much does the Vision Wide DV-1475 cost?
Price estimate
We do not have a price for the Vision Wide DV-1475 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide DV-1475 is a heavy duty vertical machining center built around a #50 spindle. Its standard accessory list names a 6,000 rpm #50 gear driven spindle, and the table rates the motor at 15 / 18 kW (20.1 / 24.1 hp), continuous and short-time.
Travels are 1,400 mm (55.1 in) in X, 750 mm (29.5 in) in Y and 700 mm (27.6 in) in Z. The Y stroke matches the width of the 1,600×750 mm (63.0×29.5 in) table, so the whole depth of the table can be cut. Load capacity is 1,500 kg (3,307 lb).
This machine gives up speed for cutting force. Rapids are 15 / 15 / 12 m/min. The SV-1480, the high speed model of about the same size, lists 30 / 30 / 24 m/min, a 10,000 rpm standard speed and 11 / 15 kW (14.8 / 20.1 hp). Vision Wide describes the DV Z axis as high torque, where the SV description speaks of a non-counter balance drive.
The DV is not locked to the gear spindle. The optional list includes an 8,000rpm #50 belt driven spindle and 10,000/12,000/15,000rpm ♯40 direct driven spindles. The power row also prints 11 / 15 kW (14.8 / 20.1 hp) in brackets without a label; it is reasonable to ask whether that rating goes with one of those optional spindles.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 1,400 mm (55.1 in) |
| Y Axis Travel | 750 mm (29.5 in) |
| Z Axis Travel | 700 mm (27.6 in) |
| Table Size | 1,600×750 mm (63.0×29.5 in) |
| Max Table Load | 1,500 kg (3,307 lb) |
| Spindle Power Cont 30 Min | 15 / 18 kW (20.1 / 24.1 hp) （11 / 15 kW (14.8 / 20.1 hp)） |
| Cutting Feed Rate | 1-10 m/min |
| Rapid Traverse Xyz | 15 / 15 / 12 m/min |
| Tool Capacity | 24 / 32 pcs |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 6,000 rpm #50 gear driven spindle as standard
- 15 / 18 kW (20.1 / 24.1 hp) spindle motor rating
- 750 mm (29.5 in) of Y travel covers the full width of the 1,600×750 mm (63.0×29.5 in) table
- Optional 8,000rpm #50 belt driven and #40 direct driven spindles up to 15,000rpm
- 1,500 kg (3,307 lb) table load
Limitations
- Rapids of 15 / 15 / 12 m/min are half those of the SV-1480
- No spindle speed row in the specification table; speeds appear only in the accessory lists
- X travel of 1,400 mm (55.1 in) is shorter than the table
- Tool capacity is 24 / 32 pcs
Best For
Frequently Asked Questions
01
The standard accessory list gives a 6,000 rpm #50 gear driven spindle. The specification table rates spindle motor power at 15 / 18 kW (20.1 / 24.1 hp), with 11 / 15 kW (14.8 / 20.1 hp) in brackets. Belt driven #50 and direct driven #40 spindles are optional.
02
1,400 mm (55.1 in) in X, 750 mm (29.5 in) in Y and 700 mm (27.6 in) in Z, with a 1,600×750 mm (63.0×29.5 in) table that takes 1,500 kg (3,307 lb).
03
The DV-1475 is the heavy duty machine: 15 / 18 kW (20.1 / 24.1 hp), a standard #50 gear driven spindle and 15 / 15 / 12 m/min rapids. The SV-1480 lists 11 / 15 kW (14.8 / 20.1 hp), a 10,000 rpm standard speed, 30 / 30 / 24 m/min rapids and 800 mm (31.5 in) of Y travel.
04
The FANUC 0iMF PLUS controller is on the standard accessory list. The optional list names a MISTUBISHI M70 controller / HEIDENHAIN iTNC 620 controller, written here as the maker prints it.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Huron NX 70
OPS Ingersoll HIGH SPEED EAGLE V550
DN Solutions DNM 4500 L
Flex Machine Tools G-10-06
Haas PMC-500SS
