Vision Wide SF-4127
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
max table load
spindle power cont 30 min
How much does the Vision Wide SF-4127 cost?
Price estimate
We do not have a price for the Vision Wide SF-4127 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The largest table in the floor-standing changer group with box way heads belongs to the Vision Wide SF-4127: 4,000x1,800 mm (157.5x70.9 in), rated for 12,000 kg (26,455 lb), under 4,100 mm (161.4 in) of X and 2,700 mm (106.3 in) of Y.
A buyer comparing it with the SF-4129 should read both tables closely. The SF-4129 has the same X travel and a floor-standing changer too, but a 4,300×2,100 mm (169.3×82.7 in) table for 16,000 kg (35,273 lb), 2,200 mm (86.6 in) of Y and linear way spindle options. This model has the longer cross travel and the lighter table. In short, the SF-4127 is the choice when side access matters most, the SF-4129 when weight and spindle speed do.
Rapid traverse is X/Y/Z：18/20/15 m/min. Cutting feed is 1-10,000 mm/min, and the maker's general claim for the series is a cutting feed rate reaching 10 m/ min.
Power comes from an 18.5/22 kW (24.8/29.5 hp) motor through a 2-step gear spindle. Z travel is 800 mm on box ways, 1,020 mm if the longer stroke is ordered for an AC head attachment.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,100 mm (161.4 in) |
| Y Axis Travel | 2,700 mm (106.3 in) |
| Z Axis Travel Box Way | 800/1,020 mm (31.5/40.2 in)(Opt.) |
| Table Size | 4,000x1,800 mm (157.5x70.9 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | X/Y/Z：18/20/15 m/min |
| Tool Capacity Floor Standing Vertical Tool Change | 32/40 pcs(Opt.) |
| Tool Capacity Floor Standing Vertical Horizontal Tool Change | 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 4,000x1,800 mm (157.5x70.9 in) table for 12,000 kg (26,455 lb)
- 2,700 mm (106.3 in) of Y travel on 4,100 mm (161.4 in) of X
- Optional Z axis travel 1,020mm for AC head attachment
- Floor-standing changer keeps the magazine off the column
Limitations
- Table load is below the 16,000 kg (35,273 lb) of the SF-4129
- X rapid is 18 m/min and Y rapid 20 m/min
- Linear way spindle options are not listed for this model
Best For
Frequently Asked Questions
01
The SF-4127 has 2,700 mm (106.3 in) of Y, a 4,000x1,800 mm (157.5x70.9 in) table and 12,000 kg (26,455 lb) of load. The SF-4129 has 2,200 mm (86.6 in) of Y, a 4,300×2,100 mm (169.3×82.7 in) table and 16,000 kg (35,273 lb).
02
X/Y/Z：18/20/15 m/min. The cutting feed range is 1-10,000 mm/min. Both rows are the same as on the SF-4123, the narrower machine of the same length.
03
800/1,020 mm (31.5/40.2 in)(Opt.) on the box way head. The longer stroke is described in the option list as being for AC head attachment.
04
18.5/22 kW (24.8/29.5 hp), the continuous and short-time ratings, with 22/26 kW (29.5/34.9 hp) as an option. The spindle is the 2-step gear type at 6,000 rpm, or 4,000 rpm optionally.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Pinnacle QV117
HNK HPM-30L (30x80)
Colchester Storm VL-1200
Sharp SVG-8743A-F
DN Solutions VC 3600 30
