Vision Wide XMF-47
Key Specifications
Tool Capacity
x axis travel
y axis travel
z axis travel
ram size
distance spindle nose to table z 2500 std
How much does the Vision Wide XMF-47 cost?
Price estimate
We do not have a price for the Vision Wide XMF-47 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A hydrostatic Z axis is the option that sets the XMF apart, and on the Vision Wide XMF-47 it deserves a close look. The accessory list offers a Z axis hydrostatic guideway; the standard machine runs its ram on conventional ways.
The ram here is 680 x 680 mm (26.8 x 26.8 in) and travels 2,500 mm (98.4 in), or 3,000 mm (118.1 in) with the option. Moving that mass smoothly up and down at low feed is hard with sliding contact, which tends to stick and release, and hard with rolling guides, which damp poorly. A hydrostatic guideway floats the ram on pressurised oil. There is no contact, so no stick-slip and no wear, and the oil film damps cutting vibration. For contouring a tall part with the ram well extended, it is the option that most affects surface finish.
It also brings a hydraulic unit to maintain. The page gives no details of it.
The XMF-47 has 4,700 mm (185.0 in) of Y travel and takes a workpiece up to 5,100 mm (200.8 in) wide. X is built within 8,200(+1m)~60,200 mm. The spindle is 22/26 kW (29.5/34.9 hp), geared at 4,000 rpm as standard, and rapid traverse is 20/20/12 m/min.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 8,200(+1m)~60,200 mm |
| Y Axis Travel | 4,700 mm (185.0 in) |
| Z Axis Travel | 2,500/3,000 mm (98.4/118.1 in) (Opt.) |
| Ram Size | 680 x 680 mm (26.8 x 26.8 in) |
| Distance Spindle Nose to Table Z 2500 Std | 500~3,000 mm (19.7~118.1 in) |
| Distance Spindle Nose to Table Z 3000 | 500~3,500 mm (19.7~137.8 in) |
| Max Workpiece Width | 5,100 mm (200.8 in) |
| Max Table Load | 5,000 kg/m2 |
| Spindle Power Cont 30 Min | 22/26 kW (29.5/34.9 hp) |
| Spindle Speed 2 Step Gear | 4,000/ 6,000 rpm (Opt.) |
| Spindle Speed Built in Motor | 8,000 rpm (Opt.) / 12,000 rpm (Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | 20/20/12 m/min |
| Tool Capacity | 32 / 40 pcs(Opt.) / 60 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Optional Z axis hydrostatic guideway
- Y travel of 4,700 mm (185.0 in)
- Maximum workpiece width of 5,100 mm (200.8 in)
- Z travel of 2,500 mm (98.4 in), or 3,000 mm (118.1 in) optional
Limitations
- The hydrostatic guideway is an option, and the page gives no data on it
- Cutting feed of 1-10,000 mm/min
- Built-in 8,000 rpm and 12,000 rpm spindles are options
Best For
Frequently Asked Questions
01
A Z axis hydrostatic guideway is on the optional accessory list for the XMF series. It is not part of the standard machine, and the page gives no figures for it.
02
Maximum workpiece width is 5,100 mm (200.8 in). Y travel is 4,700 mm (185.0 in). Spindle nose to table distance is 500~3,000 mm (19.7~118.1 in) with the standard Z.
03
Rapid traverse is 20/20/12 m/min for X, Y and Z. Cutting feed is 1-10,000 mm/min. Table load is 5,000 kg/m2 on the fixed table.
04
Standard: 4,000 rpm 2-step gear type spindle. Optional: a 6,000 rpm 2-step gear spindle, an 8,000 rpm built-in spindle and a 12,000 rpm built-in spindle. Power is listed as 22/26 kW (29.5/34.9 hp).
More from Vision Wide
Other Vertical Machining Centers (VMC)
Huron NX 70
OPS Ingersoll HIGH SPEED EAGLE V550
DN Solutions DNM 4500 L
Flex Machine Tools G-10-06
Haas PMC-500SS
