Takamaz XW-130M
Image: takamaz.co.jp, Takamaz
Key Specifications
X Travel
Z Travel
Max Spindle
Rapid Traverse
Spindle Power
max turning diameter
How much does the Takamaz XW-130M cost?
Estimated price range
Our best estimate for a cnc lathes / turning center in this class — not a quote from Takamaz. Configuration moves it a long way.
Overview
The Takamaz XW-130M is a twin-spindle turning center with driven tools, sized for chucked parts up to 130 mm (5.12 in) in diameter. Each side has its own 11 / 7.5 kW spindle running to 4,000 rpm, an 8 collet and a 10-station turret, and the strokes are 170 mm (6.7 in) in X and 220 mm (8.7 in) in Z with 24 m/min rapids on both axes.
Rotating tools run to 4,000 rpm and are rated for drill Ø16 mm and tap M4~M10. A 16 mm drill is a meaningful step over small-machine live tooling: it reaches the bolt holes and ports found on flanges, valve caps and pump covers in this diameter range, so the part can come off the machine with its holes already in. The tool count is written as 10 (One side) tools; confirm whether both turrets are driven, since that decides whether milling can be put into the first operation as well as the second.
The spindle bearing I.D. is Ø100 mm. Against the Ø75 mm of the XW-60, that larger bearing is what carries a 130 mm part and an 11 kW cut, while the 4,000 rpm ceiling still gives usable surface speed on diameters in the middle of the range.
Two neighbours bracket it. The XW-60M runs smaller parts on 7.5 / 5.5 kW × 2 spindles with 125 mm (4.9 in) of X and 140 mm (5.5 in) of Z. The XWT-10 goes up to 200 mm (7.87 in) in turning diameter on 18.5 / 15 kW × 2 spindles with 270 mm (10.6 in) of Z. The control on the XW-130M is listed as TAKAMAZ & FANUC 0i-TF, and the listed floor space is 1,990 (2,250 ※) × 2,330 mm (W × L).
Full Specifications
| Parameter | Value |
|---|---|
| Max Turning Diameter | 130 mm (5.12 in) |
| Spindle Motor Power | 11 / 7.5 kW × 2 |
| Chuck Size | Collet, 8 × 2 |
| Live Tool Speed | 4,000 rpm |
| Live Tool Capacity | drill Ø16 mm, tap M4~M10 |
| CNC Control | TAKAMAZ & FANUC 0i-TF |
| Floor Space Required | 1,990 (2,250 ※) × 2,330 mm (W × L) |
| Max Spindle Speed | 4,000 rpm |
| Maxstroke | X:170Z:220 |
| Rapid Traverse Rate | X 24 m/min, Z 24 m/min |
| Rotation Speed | 4,000 |
| Capabilities | φ16 M4~M10 |
| W L | 1,990 (2,250 ※) × 2,330 |
| Workpiece Diameter | φ150 |
| Workpiece Length | 50 |
| Max Load Capacity | 3.0 |
| Spindle Bearing ID | Ø100 mm |
| Turret Type | 10-station Turret × 2 |
| X-Axis Travel | 170 mm (6.7 in) |
| Z-Axis Travel | 220 mm (8.7 in) |
| Live Tool Count | 10 (One side) tools |
Specifications sourced from takamaz.co.jp — verified 2026-10-03
Strengths & Limitations
Strengths
- Driven tools at 4,000 rpm with drill Ø16 mm and tap M4~M10 capacity put holes and threads into the turning cycle
- Two 11 / 7.5 kW spindles, each with an 8 collet and a Ø100 mm bearing I.D.
- 10-station Turret × 2 gives each operation its own tool set
- 24 m/min rapids on both X and Z over 170 mm (6.7 in) and 220 mm (8.7 in) strokes
- Turning diameter up to 130 mm (5.12 in) on both spindles
Limitations
- The live tool count reads 10 (One side) tools, which may mean only one turret is driven
- Spindle speed tops out at 4,000 rpm, so the smallest diameters run below ideal surface speed
- Taps larger than M10 are outside the listed live tool range
- Workholding is listed only as Collet, 8 × 2, with no larger chuck option in the table
Best For
Frequently Asked Questions
01
They run to 4,000 rpm with a capacity of drill Ø16 mm and tap M4~M10. That covers bolt holes, cross ports and tapped holes on parts up to 130 mm (5.12 in) in diameter. The tool count is listed as 10 (One side) tools, so check which turret is driven.
02
X travel is 170 mm (6.7 in) and Z travel is 220 mm (8.7 in). Both axes rapid at 24 m/min. The Z stroke is set for short chucked parts; for longer work the XWT-10 offers 270 mm (10.6 in) of Z.
03
Both turn up to 130 mm (5.12 in) on two spindles with an 8 collet. On the XW-130M the table lists 10-station Turret × 2 and driven tools at 4,000 rpm. On the XW-130 the live tool row reads 4,000 RPM (optional), so the driven tools are an extra.
04
The XW-200 turns up to 200 mm (7.87 in) on 18.5 / 15 kW × 2 spindles with a 10 collet, runs to 2,800 rpm and has the same 170 mm (6.7 in) X and 220 mm (8.7 in) Z strokes. The XW-130M is the smaller, faster machine at 4,000 rpm and adds driven tools.
05
The control is listed as TAKAMAZ & FANUC 0i-TF. Check the control's options for twin-spindle programming and any loader interface with Takamaz, since the table does not describe them.
Videos
IMS - Service and Parts Dept.
More from Takamaz
Other CNC Lathes / Turning Centers
Fryer ET-40
Goodway HA-1400
Accuway UL-15
Johnford ST-160CH
Shibaura Machine TUE-150(S)
