ROMI C 2200H
Key Specifications
Max Spindle
Spindle Power
centers height
distance between centers
swing over bed
swing in front of cross slide
How much does the ROMI C 2200H cost?
Price estimate
We do not have a price for the ROMI C 2200H that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Fifty tonnes between centers: the ROMI C 2200H is rated for 50,000 kg (110,200 lbs), and the rest of the machine follows from that figure. Its bed is 1,840 mm (72 in) wide, its main motor 155 hp / 114 kW, and the 6.0 m version weighs about 60,000 kg (132,300 lbs) before a part is loaded.
It is the faster of the two top models. The spindle runs to 500 rpm, with a low range of 1 to 150 rpm in which 26,320 Nm of torque is allowed. That combination suits long, heavy shafts of moderate diameter, such as generator rotors or large rolls, which are heavy enough to need this bed but small enough at the journals to want speed.
Capacity over the bed is 2,100 mm (83 in). The long cross slide travels 1,120 mm (44 in) with 1,500 mm (59 in) of swing over it. A short cross travel of 500 mm (20 in) is listed as well, and in front of that short carriage the swing is 1,600 mm (63 in).
The tailstock is on the same scale as the load: a 330 mm (13 in) quill with 450 mm (17.7 in) of travel and a built-in 100 x 60° live center, moved by servo drive and fitted with its own operator platform. Lengths run from 4 to 12 m between centers, and each further 2,000 mm (79”) bed segment adds 6,000 kg (13,200 lbs). Installed power is 150 kVA. X and Z both rapid at 8 m/min (315 in/min), and the control is a Siemens Sinumerik 840D.
Full Specifications
| Parameter | Value |
|---|---|
| Centers Height | 1,060 mm (42 in) |
| Distance Between Centers | 4 / 6 / 8 / 10 / 12 m (157 / 236 / 315 / 394 / 472 in) |
| Swing Over Bed | 2,100 mm (83 in) |
| Swing in Front of Cross Slide | 1,600 mm (63 in) |
| Swing Over Cross Slide | 1,500 mm (59 in) |
| X Axis Travel | 1,120 mm (44 in) |
| X Axis Travel Short | 500 mm (20 in) |
| Z Axis Travel | 4,110 / 6,110 / 8,110 / 10,110 / 12,110 mm (162 / 241 / 319 / 398 / 477 in) |
| Max Weight Between Centers | 50,000 kg (110,200 lbs) at 50 rpm with ASA A2-20” |
| Bed Width | 1,840 mm (72 in) |
| Bed Height | 800 mm (31 in) |
| Spindle Nose | ASA A2-20” |
| Spindle Bore | 305 mm (12 in) |
| Max Spindle Speed | 1 to 500 rpm |
| Spindle Speed Range 1 | 1 to 150 rpm |
| Spindle Torque | 26,320 Nm (19,414 lb-ft) |
| Front Bearing Inner Diameter | 431.8 mm (17 in) |
| Rapid Traverse Z | 8 m/min (315 in/min) |
| Rapid Traverse X | 8 m/min (315 in/min) |
| Tailstock Body Positioning | Servo driven |
| Tailstock Quill Drive | Manual (standard); hydraulic (optional) |
| Tailstock Quill Travel | 450 mm (17.7 in) |
| Tailstock Quill Diameter | 330 mm (13 in) |
| Tailstock Live Center | 100 x 60° (built-in) |
| Spindle Motor Power | 155 hp / 114 kW (S2 - 30 min. rating); 96 hp / 70 kW continuous |
| Power Requirement | 150 kVA |
| Floor Space | 11.8 x 4.5 m (465 x 177 in) with 6.0 m between centers |
| Machine Weight | 60,000 kg (132,300 lbs) approx. with 6.0 m between centers |
| CNC Control | Siemens Sinumerik 840D |
Specifications sourced from romi.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Rated for 50,000 kg (110,200 lbs) between centers at 50 rpm
- 155 hp / 114 kW main motor, 96 hp / 70 kW continuous
- Speed up to 500 rpm with 26,320 Nm in the 1 to 150 rpm range
- Tailstock quill of 330 mm (13 in) with 450 mm (17.7 in) of travel
- Bed lengths to 12 m (472 in) between centers on a 1,840 mm (72 in) wide bed
Limitations
- Torque is lower than the 44,200 Nm of the C 2600H
- Installed power of 150 kVA
- Floor space of 11.8 x 4.5 m (465 x 177 in) for the 6.0 m machine
- Thru-hole stays at 305 mm (12 in) despite the size of the lathe
Best For
Frequently Asked Questions
01
Maximum weight between centers is 50,000 kg (110,200 lbs) at 50 rpm with the ASA A2-20” spindle. The tailstock that supports it has a 330 mm (13 in) quill, 450 mm (17.7 in) of quill travel and a 100 x 60° built-in live center.
02
The main motor is rated 155 hp / 114 kW on the S2 - 30 min. rating and 96 hp / 70 kW continuous. Maximum torque allowed is 26,320 Nm. The speed range is 1 to 500 rpm, with range I at 1 to 150 rpm. Total power installed is 150 kVA.
03
The C 2200H swings 2,100 mm (83 in) and runs to 500 rpm with 26,320 Nm. The C 2600H swings 2,580 mm (102 in), is limited to 300 rpm and allows 44,200 Nm. Both carry 50,000 kg (110,200 lbs), so diameter and speed decide.
04
Cross travel on the X axis is 1,120 mm (44 in), and a short cross travel of 500 mm (20 in) is also listed. Swing over the cross slide is 1,500 mm (59 in), or 1,600 mm (63 in) in front of the cross slide with a short carriage.
More from Romi
Other CNC Lathes / Turning Centers
Mazak QT-350MY
You Ji VHL1200ATC
Okuma LB3000 EX III
