Onsrud 240GW10 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 240GW10 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 240GW10 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 240GW10 5-Axis carries its 5-axis head on a ten-foot bridge. The table is 240 in (6,096 mm) in X and 120 in (3,048 mm) in Y, and Onsrud lists the model with a 16 in (406 mm) and an 18 in (457 mm) Z-stroke.
Ten feet of Y matters for marine and aerospace panels. Bulkheads, deck sections, hatch covers and cored panels often run wider than eight feet, and with a 5-axis head their edges can be cut to the hull angle instead of square. The head needs clearance beyond the part edge to do that, which a 120 in (3,048 mm) table gives on parts of eight or nine feet.
The long bridge is carried on the structure Onsrud describes for the series: one-piece vertical steel columns, with a helical rack and dual drives. The frame is 200 in (5,080 mm) wide. With the 16 in stroke it is 335 in (8,509 mm) long and 103 in (2,617 mm) high, and with the 18 in stroke 331 in (8,408 mm) long and 140 in (3,556 mm) high.
Five vacuum zones are standard. The base spindle is 18 hp (13.4 kW) at 24,000 rpm, and tool capacity is 12. A wide table and a single head make for long traverses between features, so a second tool changer is a sensible addition.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 240 in (6,096 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 335 in (8,509 mm) with 16 in Z; 331 in (8,408 mm) with 18 in Z |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 103 in (2,617 mm) with 16 in Z; 140 in (3,556 mm) with 18 in Z |
| Vacuum Zones Standard | 5 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 16 in (406 mm); 18 in (457 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 120 in (3,048 mm) of table Y for parts wider than eight feet
- 240 in (6,096 mm) of table X
- Dual-drive gantry on one-piece steel columns
- Second tool changer and 33 hp (24.6 kW) spindle offered
Limitations
- Frame width of 200 in (5,080 mm)
- 16 in (406 mm) or 18 in (457 mm) of Z only
- 5 zones cover a large table
Best For
Frequently Asked Questions
01
240 in (6,096 mm) in X by 120 in (3,048 mm) in Y, with 5 vacuum zones as standard. Both Z-stroke versions have the same table.
02
Onsrud lists 103 in (2,617 mm) for the 16 in machine and 140 in (3,556 mm) for the 18 in machine. Length changes from 335 in (8,509 mm) to 331 in (8,408 mm). The width is 200 in (5,080 mm) for both.
03
Onsrud names the marine industry among the uses of the G-Series 5-Axis and lists composites, foam and wood among its materials. This model suits flat and shallow marine parts. Deep plugs and moulds need the taller strokes of the 228GW10 5-Axis.
04
Stroke and table length. The 228GW10 5-Axis has 28 in or 40 in of Z and a table X of 228 in (5,792 mm). The 240GW10 5-Axis has 16 in or 18 in of Z and 240 in (6,096 mm) of table X.
