Onsrud 193G 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 193G 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 193G 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Onsrud lists the 193G 5-Axis under one Z-stroke only, 16 in (406 mm), with a table 192.5 in (4,890 mm) long and 61 in (1,550 mm) wide. It is a sixteen-foot 5-axis gantry router that stays as low as a sheet machine: 103 in (2,617 mm) high.
Low height and a long table point to one kind of work. Flat or gently curved panels are laid on the vacuum table, routed to shape, and then finished along their edges with the head tilted. Chamfers, scarf joints, angled slots and drilled holes off the vertical all come from the same setup. For a boat builder or a vehicle body shop that removes a second handling step.
Four vacuum zones are standard, so the table divides into two halves of two zones each. Onsrud describes pendulum processing for the series, with material loaded in one zone while the gantry cuts in the other, and this table length is the first in the 5-axis line where each half takes an eight-foot panel.
The machine is 287 in (7,290 mm) long and 136 in (3,455 mm) wide. In the 18 in block of Onsrud's table the same position is filled by the 181G 5-Axis, with a shorter table of 181 in (4,598 mm). Spindle power is 18 hp (13.4 kW) as standard and 24,000 rpm, with 12 tools.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 192.5 in (4,890 mm) |
| Table Size Y | 61 in (1,550 mm) |
| Machine Length | 287 in (7,290 mm) |
| Machine Width | 136 in (3,455 mm) |
| Machine Height | 103 in (2,617 mm) |
| Vacuum Zones Standard | 4 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 16 in (406 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 192.5 in (4,890 mm) by 61 in (1,550 mm) table on a machine only 103 in (2,617 mm) high
- 4 vacuum zones: two eight-foot pendulum halves
- Edge work and angled features in the same setup as profiling
- FANUC interface as standard, or Onsrud's touchscreen
Limitations
- 16 in (406 mm) is the only Z-stroke listed under this code
- Machine length of 287 in (7,290 mm)
- Shallow parts only; deep shapes need a taller-stroke model
Best For
Frequently Asked Questions
01
Onsrud's table gives each Z-stroke its own set of model codes. In the 18 in block this frame position is the 181G 5-Axis, with a 181 in (4,598 mm) table and a machine height of 140 in (3,556 mm).
02
A great deal on flat stock: bevels, compound-angle holes, undercut edges and trimmed outlines. The limit is part height. A 16 in (406 mm) stroke, less the tool and the tilted head, leaves room for shallow parts only.
03
The table is 192.5 in (4,890 mm) by 61 in (1,550 mm). The machine is 287 in (7,290 mm) long, 136 in (3,455 mm) wide and 103 in (2,617 mm) high, the same figures Onsrud gives for the 3-axis 193G with its 11 in stroke.
04
That is what Onsrud's pendulum processing describes: load one zone while the gantry machines in the other, then swap. The 4 standard vacuum zones on this table support two working halves. Guarding for the operator has to be part of the specification.
