Onsrud 193G
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 193G cost?
Price estimate
We do not have a price for the Onsrud 193G that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Two eight-foot sheets laid end to end fit the Onsrud 193G, and that is the simplest way to understand it. The table is 192.5 in (4,890 mm) long and 61 in (1,550 mm) wide, with 4 vacuum zones as standard, so each sheet position can have two zones of its own.
That layout suits the pendulum method Onsrud describes for the G-Series: the gantry cuts a sheet at one end while the operator unloads and reloads the other. On shorter tables the method is limited to part-sheets. Here it works with full eight-foot material, provided the guarding is specified for an operator standing beside a running machine.
As a 3-axis moving-gantry router the 193G is listed with an 11 in (279 mm) or an 18 in (457 mm) Z-stroke. Machine length is 287 in (7,290 mm) with the first and 283 in (7,189 mm) with the second. Height is 103 in (2,617 mm) or 140 in (3,556 mm), and the frame is 136 in (3,455 mm) wide in both cases.
One 18 hp (13.4 kW) spindle, 24,000 rpm and 12 tools are standard. A second spindle is the upgrade that fits this table best. Two heads can cut the same nest on both sheet positions, or one can be parked so the other reaches the whole table for a long part. A 24 hp (17.9 kW) spindle is also listed.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 192.5 in (4,890 mm) |
| Table Size Y | 61 in (1,550 mm) |
| Machine Length | 287 in (7,290 mm) with 11 in Z; 283 in (7,189 mm) with 18 in Z |
| Machine Width | 136 in (3,455 mm) |
| Machine Height | 103 in (2,617 mm) with 11 in Z; 140 in (3,556 mm) with 18 in Z |
| Vacuum Zones Standard | 4 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 11 in (279 mm); 18 in (457 mm) |
| Spindle Power Optional | 24 hp (17.9 kW) |
| Spindles Optional | Up to 4 |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 192.5 in (4,890 mm) table holds two eight-foot sheets end to end
- 4 vacuum zones as standard, two per sheet position
- Up to 4 spindles listed as an upgrade
- 11 in (279 mm) or 18 in (457 mm) Z-stroke
Limitations
- Machine length of 287 in (7,290 mm) with the 11 in Z-stroke
- Two ten-foot sheets do not fit; the 241G is the size for that
- The 18 in stroke raises machine height to 140 in (3,556 mm)
Best For
Frequently Asked Questions
01
That is the figure in Onsrud's table: 192.5 in (4,890 mm) in X, with 61 in (1,550 mm) in Y. It is the only half-inch table length in the series. In practice it covers two eight-foot sheets with a small allowance between them.
02
Yes, for sheets up to eight feet. The table has 4 vacuum zones as standard, so one half can hold a sheet under vacuum while the other half is released for unloading. Onsrud describes this two-zone method for the whole G-Series.
03
With the 11 in Z-stroke it is 287 in (7,290 mm) long, 136 in (3,455 mm) wide and 103 in (2,617 mm) high. With the 18 in Z-stroke it is 283 in (7,189 mm) long, the same width, and 140 in (3,556 mm) high.
04
The 241G, with a table of 242 in (6,147 mm) and 5 vacuum zones. It keeps the 193G's 61 in (1,550 mm) table width and the same spindle and tooling, and adds enough length for two ten-foot sheets.
