HNK HPM-40M (40x100)
Key Specifications
Spindle Taper
Table Size
Spindle Power
distance between columns
x axis travel
y axis travel
How much does the HNK HPM-40M (40x100) cost?
Price estimate
We do not have a price for the HNK HPM-40M (40x100) that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The HNK HPM-40M (40x100) is the largest five-face machine in the HPM-M series, with a 4,000 x 10,000 mm (157.5 x 393.7 in) table, 10,250 mm (403.5 in) of X travel and a 60,000 kg (132,275 lb) rating.
Three HNK machines are built on this table. The die and mold HPM-40H (40x100) carries 35,000 kg (77,160 lb). The HPM-40L (40x100) carries 80,000 kg (176,367 lb) and has 4,000 mm (157.5 in) under its spindle. The HPM-40M (40x100) stands between the two, and its strength is the stated five-face purpose combined with a mid-weight structure.
What would fill it? Wind-turbine bedplates and hubs, large diesel engine frames, press bolsters, and the base structures of other machine tools. Parts like these have machined faces on several sides and long bolting surfaces that must be flat over metres.
Y travel is 6,000 mm (236.2 in) between columns 5,000 mm (196.9 in) apart. The crossrail travels 2,800 mm (110.2 in); the 400 x 400 mm (15.7 x 15.7 in) ram travels 1,000 mm (39.4 in), 1,200 mm (47.2 in) in braces. Spindle: Ø130 mm (5.1 in), ISO No.50, with 22/26, 30/37 or 37/45 kW (49.6/60.3 hp), cont/30min.
Full Specifications
| Parameter | Value |
|---|---|
| Distance Between Columns | 5,000 mm (196.9 in) |
| X Axis Travel | 10,250 mm (403.5 in) |
| Y Axis Travel | 6,000 mm (236.2 in) |
| Z Axis Travel | 1,000 mm (39.4 in) {1,200 mm (47.2 in)} |
| W Axis Travel | 2,800 mm (110.2 in) |
| Table Size | 4,000 x 10,000 mm (157.5 x 393.7 in) |
| Max Table Load | 60,000 kg (132,275 lb) |
| Spindle Taper | ISO No.50 |
| Spindle Diameter | Ø130 mm (5.1 in) |
| Ram Size | 400 x 400 mm (15.7 x 15.7 in) |
| Spindle Motor Power | 22/26, 30/37, 37/45 kW (29.5/34.9, 40.2/49.6, 49.6/60.3 hp) (cont/30min) |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 10,250 mm (403.5 in) of X travel
- 4,000 x 10,000 mm (157.5 x 393.7 in) table rated at 60,000 kg (132,275 lb)
- 6,000 mm (236.2 in) of Y and 2,800 mm (110.2 in) of W
- Five-face machining on a ten-metre table
Limitations
- Load rating is the same as on the 40x80
- Largest listed motor is 37/45 kW (49.6/60.3 hp)
- Speed and daylight figures are not printed cleanly by the maker
Best For
Frequently Asked Questions
01
The table is 4,000 x 10,000 mm (157.5 x 393.7 in) and X travel is 10,250 mm (403.5 in). Y travel is 6,000 mm (236.2 in) and the effective distance between columns 5,000 mm (196.9 in).
02
When weight or height exceeds the M. The HPM-40L (40x100) takes 80,000 kg (176,367 lb), offers 4,000 mm (157.5 in) from table to spindle end and a Ø160 mm (6.3 in) spindle, but runs at 1,000 rpm.
03
Mainly the head. A Ø130 mm (5.1 in), ISO No.50 spindle with at most 37/45 kW (49.6/60.3 hp) is the same specification listed for the HPM-15M, so metal removal rate does not scale with the table.
04
1,000 mm (39.4 in), with 1,200 mm (47.2 in) in braces. The ram section is 400 x 400 mm (15.7 x 15.7 in), and the crossrail adds 2,800 mm (110.2 in) of W travel.
