HNK HFM 20X60
Key Specifications
Max Spindle
Spindle Taper
Table Size
distance spindle nose to table
x axis travel
y axis travel
How much does the HNK HFM 20X60 cost?
Price estimate
We do not have a price for the HNK HFM 20X60 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The HNK HFM 20X60 is the largest HFM listed. Its 5-axis head works over a 2,000 x 6,000 mm (78.7 x 236.2 in) table that travels 6,700 mm (263.8 in) in X.
Six metres is where a moving-table machine starts to demand floor space, because the table needs its own length again to run out from under the head. Buyers should lay that out before anything else. In return the part never leaves a rigid cast table, and HNK's pallet system can still be used.
Cross travel is 2,100 mm (82.7 in) and vertical travel 700 mm (27.6 in), with 650 mm (25.6 in) from table to spindle nose. The spindle is the 30,000 rpm HSK63-A unit of the 2,000 mm wide sizes, and the rotary ranges are ±120˚ in A and ±200˚ in C.
HNK lists no table load, so a heavy steel fixture plate for a six-metre part should be checked against the maker's figure before ordering.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 2,000 x 6,000 mm (78.7 x 236.2 in) |
| Distance Spindle Nose to Table | 650 mm (25.6 in) |
| Max Spindle Speed | 30,000 rpm |
| Spindle Taper | HSK63-A |
| X Axis Travel | 6,700 mm (263.8 in) |
| Y Axis Travel | 2,100 mm (82.7 in) |
| Z Axis Travel | 700 mm (27.6 in) |
| A Axis Range | ±120˚ |
| C Axis Range | ±200˚ |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Longest X in the HFM series at 6,700 mm (263.8 in)
- 2,000 x 6,000 mm (78.7 x 236.2 in) table
- 30,000 rpm on HSK63-A with A ±120˚ and C ±200˚
Limitations
- Moving table needs clear floor at both ends of a 6,700 mm stroke
- Y travel stays at 2,100 mm (82.7 in), no wider than the HFM 20X40
- Table load is not stated for a table this long
Best For
Frequently Asked Questions
01
The table is 2,000 x 6,000 mm (78.7 x 236.2 in). Travels are 6,700 mm (263.8 in) in X, 2,100 mm (82.7 in) in Y and 700 mm (27.6 in) in Z, and the spindle nose sits at most 650 mm (25.6 in) above the table surface.
02
Not in HNK's published table, which ends at this size. For longer aerospace parts HNK lists gantry profilers instead, such as the GST-2S with 20,000 mm (787.4 in) of X travel.
03
The spindle. HSK63-A at 30,000 rpm is built for small tools at high speed, and the table gives no power or torque. HNK describes the series as high speed and high precision for aircraft, electronic and automobile parts.
More from HNK
Other 5-Axis Machining Centers
Feeler VUX-300T
Hurco VMX60SWi
GF Machining Liechti Turbomill 1400i
Huron K2X 10 Five
AWEA LP-6033YZF
