HNK HFM 10X20
Key Specifications
Max Spindle
Spindle Taper
Table Size
distance spindle nose to table
x axis travel
y axis travel
How much does the HNK HFM 10X20 cost?
Price estimate
We do not have a price for the HNK HFM 10X20 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The HNK HFM 10X20 is the smallest of HNK's 5-axis high-speed milling machines: a 1,000 x 2,000 mm (39.4 x 78.7 in) table under a universal head, with an HSK63-A spindle listed at 16,000 rpm and 30,000 rpm in braces.
Travels are 2,700 mm (106.3 in) in X on the table, 1,100 mm (43.3 in) across in Y and 550 mm (21.7 in) vertically in Z. The X figure is longer than the table itself, which fits HNK's remark that the series works with a pallet system: the table has to run clear of the head before a pallet can be exchanged. Height is the tight dimension. With 500 mm (19.7 in) from table surface to spindle nose, this is a machine for plates, ribs and shallow pockets, not deep cavities.
HNK aims the series at aircraft, electronic and automobile parts and fits an automatic universal head for work on several surfaces. The C-axis turns ±200˚. The A-axis cell for this size is not printed cleanly in the maker's table, and no table load, spindle power or tool magazine is listed, so those points have to be settled with HNK.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 1,000 x 2,000 mm (39.4 x 78.7 in) |
| Distance Spindle Nose to Table | 500 mm (19.7 in) |
| Max Spindle Speed | 16,000 rpm {30,000 rpm} |
| Spindle Taper | HSK63-A |
| X Axis Travel | 2,700 mm (106.3 in) |
| Y Axis Travel | 1,100 mm (43.3 in) |
| Z Axis Travel | 550 mm (21.7 in) |
| C Axis Range | ±200˚ |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- HSK63-A spindle at 16,000 rpm, with 30,000 rpm in braces
- X travel of 2,700 mm (106.3 in) on a table 2,000 mm (78.7 in) long
- Automatic universal head with a C-axis range of ±200˚
Limitations
- Only 500 mm (19.7 in) between table surface and spindle nose
- Y travel of 1,100 mm (43.3 in) is the narrowest of the HFM sizes
- No table load, spindle power or tool capacity in the published table
Best For
Frequently Asked Questions
01
The table gives 16,000 rpm, with 30,000 rpm in braces, on an HSK63-A nose taper. HNK does not explain the braces on its page, so ask which of the two speeds a quoted machine carries. Spindle power is not listed for any HFM size.
02
The table is 1,000 x 2,000 mm (39.4 x 78.7 in), with travels of 2,700 mm (106.3 in) in X, 1,100 mm (43.3 in) in Y and 550 mm (21.7 in) in Z. The distance from table surface to spindle nose is 500 mm (19.7 in), which caps the height of part and fixture together.
03
Only in length. The HFM 10X30 has a 1,000 x 3,000 mm (39.4 x 118.1 in) table and 3,700 mm (145.7 in) of X travel. Y, Z, the spindle and the 500 mm (19.7 in) nose-to-table distance are the same on both.
