HNK HFM 10X30
Key Specifications
Max Spindle
Spindle Taper
Table Size
distance spindle nose to table
x axis travel
y axis travel
How much does the HNK HFM 10X30 cost?
Price estimate
We do not have a price for the HNK HFM 10X30 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A table three times as long as it is wide defines the HNK HFM 10X30. It measures 1,000 x 3,000 mm (39.4 x 118.1 in) and travels 3,700 mm (145.7 in) in X beneath a 5-axis universal head.
That proportion suits long, slender aluminium parts: stringers, seat tracks, floor beams, extruded profiles that need pocketing along their length. Across the table the head has 1,100 mm (43.3 in) of Y, and vertically 550 mm (21.7 in) of Z, with 500 mm (19.7 in) between table surface and spindle nose. None of those differ from the HFM 10X20, so stepping up to this size buys length and nothing else.
The spindle is the series' HSK63-A unit, shown at 16,000 rpm with 30,000 rpm in braces. HNK describes the HFM machines as high speed and high precision, for aircraft, electronic and automobile parts, and mentions a pallet system and an automatic universal head. C-axis range is ±200˚. Loads, power and tool storage are absent from the table.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 1,000 x 3,000 mm (39.4 x 118.1 in) |
| Distance Spindle Nose to Table | 500 mm (19.7 in) |
| Max Spindle Speed | 16,000 rpm {30,000 rpm} |
| Spindle Taper | HSK63-A |
| X Axis Travel | 3,700 mm (145.7 in) |
| Y Axis Travel | 1,100 mm (43.3 in) |
| Z Axis Travel | 550 mm (21.7 in) |
| C Axis Range | ±200˚ |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 3,700 mm (145.7 in) of X travel over a 3,000 mm (118.1 in) long table
- 16,000 rpm HSK63-A spindle, 30,000 rpm shown in braces
- C-axis range of ±200˚ on the universal head
Limitations
- Table width stays at 1,000 mm (39.4 in) with 1,100 mm (43.3 in) of Y
- Z travel of 550 mm (21.7 in) limits tall fixtures
- A-axis range for this size is not printed cleanly by the maker
Best For
Frequently Asked Questions
01
X is 3,700 mm (145.7 in) on the table, Y is 1,100 mm (43.3 in) on the spindle head cross slide and Z is 550 mm (21.7 in) vertically. The table itself measures 1,000 x 3,000 mm (39.4 x 118.1 in).
02
No. Both have a 1,000 mm wide table and 1,100 mm (43.3 in) of Y. The HFM 10X20 has 2,700 mm (106.3 in) of X travel, so the two differ by table length only. For more width, the HFM 15X40 offers 1,600 mm (63.0 in) of Y.
03
HSK63-A. The speed row reads 16,000 rpm with 30,000 rpm in braces, a notation the maker leaves unexplained, and there is no power or torque row in the table for this series.
More from HNK
Other 5-Axis Machining Centers
Matsuura MX-520
GF Machining MIKRON MILL X 600 U
Okuma MU-4000V LL
CMS Kyros
Huron GU3 Five
