HNK HPM-35M (35x80)
Key Specifications
Spindle Taper
Table Size
Spindle Power
distance between columns
x axis travel
y axis travel
How much does the HNK HPM-35M (35x80) cost?
Price estimate
We do not have a price for the HNK HPM-35M (35x80) that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The HNK HPM-35M (35x80) combines the 3,500 mm wide five-face bridge with 8,250 mm (324.8 in) of X travel. Its table, 3,500 x 8,000 mm (137.8 x 315.0 in), is rated at 50,000 kg (110,229 lb).
How is an eight-metre five-face machine used? Rarely on one eight-metre part. More often two workpieces are set on the table, and while one is being cut the other is measured, shimmed or changed. That only works if the load rating allows both at once, and fifty tonnes gives real room for it. The same table on the die and mold HPM-35H (35x80) is rated at 30,000 kg (66,138 lb).
Across the machine, the columns are 4,500 mm (177.2 in) apart and Y travel is 5,500 mm (216.5 in). Vertically, the crossrail moves 2,800 mm (110.2 in) and the 400 x 400 mm (15.7 x 15.7 in) ram 1,000 mm (39.4 in), with 1,200 mm (47.2 in) in braces.
The spindle is Ø130 mm (5.1 in) with ISO No.50 taper. HNK lists three motors, 22/26, 30/37 and 37/45 kW (49.6/60.3 hp), cont/30min, and no clean speed figure. Controls are Fanuc 31i-B and Siemens 840D.
Full Specifications
| Parameter | Value |
|---|---|
| Distance Between Columns | 4,500 mm (177.2 in) |
| X Axis Travel | 8,250 mm (324.8 in) |
| Y Axis Travel | 5,500 mm (216.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) {1,200 mm (47.2 in)} |
| W Axis Travel | 2,800 mm (110.2 in) |
| Table Size | 3,500 x 8,000 mm (137.8 x 315.0 in) |
| Max Table Load | 50,000 kg (110,229 lb) |
| Spindle Taper | ISO No.50 |
| Spindle Diameter | Ø130 mm (5.1 in) |
| Ram Size | 400 x 400 mm (15.7 x 15.7 in) |
| Spindle Motor Power | 22/26, 30/37, 37/45 kW (29.5/34.9, 40.2/49.6, 49.6/60.3 hp) (cont/30min) |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 8,250 mm (324.8 in) of X on a 3,500 mm (137.8 in) wide table
- 50,000 kg (110,229 lb) rating allows two heavy set-ups
- 2,800 mm (110.2 in) of W-axis travel
- Y travel of 5,500 mm (216.5 in)
Limitations
- Motor choice tops out at 37/45 kW (49.6/60.3 hp)
- Spindle speed missing from the usable data
- Table load is shared with the shorter 35x60
Best For
Frequently Asked Questions
01
3,500 x 8,000 mm (137.8 x 315.0 in) and 50,000 kg (110,229 lb). X travel is 8,250 mm (324.8 in), slightly longer than the table.
02
The HPM-40M (40x80) is 4,000 mm wide, has 5,000 mm (196.9 in) between columns, 6,000 mm (236.2 in) of Y and carries 60,000 kg (132,275 lb). X travel, crossrail travel, ram and spindle are the same as on the HPM-35M (35x80).
03
1,000 mm (39.4 in), with 1,200 mm (47.2 in) in braces, in a 400 x 400 mm (15.7 x 15.7 in) ram. The crossrail gives a further 2,800 mm (110.2 in) of vertical adjustment.
04
The table does not single one out. It lists Fanuc 31i-B and Siemens 840D side by side, as it does for every model in the HPM-M series.
More from HNK
Other 5-Axis Machining Centers
Sharp SVX-160-F
Makino N2-5XA
Starrag SIP 7000
Mazak VERSATECH V-100N
Hartford Aero-536BL-5X
