Han's Laser MPS-6020D
Key Specifications
Accuracy
Repeatability
cutting area
max positioning speed
max acceleration
max table load
How much does the Han's Laser MPS-6020D cost?
Price estimate
We do not have a price for the Han's Laser MPS-6020D that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Han's Laser MPS-6020D cuts sheet and plate on a 6,000 × 2,000 mm (236.2 × 78.7 in) bed. It is the first six-metre machine in the MPS-D series and the lighter of the two: the worktable is rated for 1,800 kg (3,968 lb) and the machine weighs approx. 6.0 T.
Six metres of length is useful in two ways. One long part, a truck chassis rail or a trailer side, fits without repositioning. Or two shorter sheets can lie end to end, so the operator unloads one while the head is cutting the other.
The table load deserves a second look, though. 1,800 kg (3,968 lb) spread over a bed this long is a modest figure, and it points to sheet work, not heavy plate. Han's Laser offers the same length in a 2,500 mm width as the MPS-6025D, whose table carries 3,000 kg (6,614 lb), and in the HF Expert line as the G6020HF, rated for 5,600 kg (12,346 lb).
Dynamics are those of the larger MPS-D machines: 100 m/min maximum positioning speed and 1.0 g. Accuracy is ±0.05 mm/m with ±0.03 mm repositioning. The machine is 8,500 × 2,900 × 2,000 mm (334.6 × 114.2 × 78.7 in) overall. Its build follows the series: dual servo drive, rack and pinion, welded frame, Han's own control, switchable high and low pressure assist gas. Laser power is not published.
Full Specifications
| Parameter | Value |
|---|---|
| Cutting Area | 6,000 × 2,000 mm (236.2 × 78.7 in) |
| Positioning Accuracy | ±0.05 mm/m |
| Repeatability | ±0.03 mm |
| Max Positioning Speed | 100 m/min |
| Max Acceleration | 1.0 g |
| Max Table Load | 1,800 kg (3,968 lb) |
| Machine Weight | Approx. 6.0 T |
| Machine Dimensions | 8,500 × 2,900 × 2,000 mm (334.6 × 114.2 × 78.7 in) |
Specifications sourced from hanslaser.net — verified 2026-10-05
Strengths & Limitations
Strengths
- 6,000 × 2,000 mm (236.2 × 78.7 in) bed for long parts or two short sheets
- Approx. 6.0 T machine weight keeps foundation demands moderate for the length
- ±0.03 mm repositioning accuracy, unchanged from the smaller models
- Dual servo drive with rack & pinion on both sides of the gantry
Limitations
- Worktable load of 1,800 kg (3,968 lb) is low for a bed of this length
- Bed width stays at 2,000 mm; the MPS-6025D adds the wider format
- No laser power, Z travel or supply data in the table
Best For
Frequently Asked Questions
01
The machine weight is approx. 6.0 T. The maximum worktable load is 1,800 kg (3,968 lb). Overall dimensions are 8,500 × 2,900 × 2,000 mm (334.6 × 114.2 × 78.7 in).
02
Width and capacity. The MPS-6025D has a 6,000 × 2,500 mm (236.2 × 98.4 in) processing area, a 3,000 kg (6,614 lb) table load and weighs approx. 7.5 T. The MPS-6020D is 2,000 mm wide, carries 1,800 kg (3,968 lb) and weighs approx. 6.0 T. Speed and accuracy are the same.
03
Maximum positioning speed is 100 m/min and maximum acceleration 1.0 g. Those are positioning figures for the axes; cutting speed depends on the laser power and the material, neither of which the data sheet specifies.
More from Han's Laser
Other CNC Laser Cutting Machines
Trumpf TruLaser Tube 7000 Fiber
HSG TX3
Amada LCG-3015AJ
BLM Group LT360
Yawei HLB-1530
