HSG TX3

Specs verified 2026-10-05 · hsglaser.com Updated 2026-10-05

Key Specifications

laser power

6,000-20,000 W

round tube capacity

Φ40-Φ360 mm (1.6-14.2 in)

square tube capacity

40 × 40 to 360 × 360 mm (1.6 × 1.6 to 14.2 × 14.2 in)

angle steel capacity

40-350 mm side length (1.6-13.8 in), equal and unequal

channel steel capacity

40-350 mm side length (1.6-13.8 in), diagonal < 495 mm (19.5 in)

i beam h beam capacity

40-350 mm side length (1.6-13.8 in), diagonal < 495 mm (19.5 in)

How much does the HSG TX3 cost?

Price estimate

Uncertain

We do not have a price for the HSG TX3 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The HSG TX3 is a heavy-duty tube laser that HSG pitches at open profiles as much as at tube. Round tube runs from Φ40 to Φ360 mm (1.6-14.2 in) and square tube from 40 × 40 to 360 × 360 mm, and the brochure adds separate ranges for angle steel, channel steel and I-beam or H-beam: 40-350 mm side length (1.6-13.8 in), with a diagonal under 495 mm (19.5 in) for channels and beams. A single piece can weigh 1,600 kg (3,527 lb). Laser power is 6,000-20,000 W.

That list is what separates a profile machine from a tube machine in practice. Beams and channels do not rotate about a round centre, so the diagonal limit, not the side length, decides whether a section clears the chucks. A fabricator of building steel should check the largest beam against the 495 mm figure first.

The chucks clamp anything from 40-360mm without retooling, according to HSG, and are sealed against smoke and slag. Chuck speed is 60 rpm, with 80 m/min maximum linkage speed and 0.8 G. Those are sensible numbers for pieces of this weight, though the TX3 PRO is listed at 100 m/min and 1.0 G.

Servo follow-up supports carry the tube during the cut and a follow-up supporting plate takes it at unloading; HSG says the arrangement handles complete loading and unloading of 12m-long tubes. Bevel cutting within ±45° needs the optional 3D cutting head, and the twin chuck is an option too.

Full Specifications

Parameter	Value
Laser Power	6,000-20,000 W
Round Tube Capacity	Φ40-Φ360 mm (1.6-14.2 in)
Square Tube Capacity	40 × 40 to 360 × 360 mm (1.6 × 1.6 to 14.2 × 14.2 in)
Angle Steel Capacity	40-350 mm side length (1.6-13.8 in), equal and unequal
Channel Steel Capacity	40-350 mm side length (1.6-13.8 in), diagonal < 495 mm (19.5 in)
I Beam H Beam Capacity	40-350 mm side length (1.6-13.8 in), diagonal < 495 mm (19.5 in)
Max Single Tube Weight	1,600 kg (3,527 lb)
Max Linkage Speed	80 m/min
Max Acceleration	0.8 G
Chuck Speed	60 rpm
Bevel Cutting	Optional
Twin Chuck	Optional

Specifications sourced from hsglaser.com — verified 2026-10-05

Strengths & Limitations

Strengths

Published ranges for angle steel, channel steel and I-beam or H-beam, 40-350 mm side length (1.6-13.8 in), as well as tube
Round tube from Φ40 to Φ360 mm (1.6-14.2 in) clamped without retooling
Single piece weight of 1,600 kg (3,527 lb)
Loading and unloading of 12m-long tubes with servo follow-up support and a follow-up supporting plate
Laser power from 6,000 to 20,000 W for heavy wall and flange thickness

Limitations

Channels and beams must have a diagonal under 495 mm (19.5 in)
80 m/min and 0.8 G, below the 100 m/min and 1.0 G of the TX3 PRO
Bevel cutting and the 3D cutting head are optional, and so is the twin chuck
Nothing smaller than Φ40 mm (1.6 in) round or 40 × 40 mm square can be clamped

Best For

Structural steel: beams, channels and angles up to 350 mm (13.8 in) Heavy round and square tube up to 360 mm (14.2 in) Pieces up to 1,600 kg (3,527 lb) and 12m long Weld preparation with the optional ±45° bevel head

Frequently Asked Questions

01 Which profiles can the HSG TX3 cut besides tube?

HSG's brochure lists equal and unequal angle steel with a 40-350 mm side length, and channel steel and I-beam or H-beam with a 40-350 mm side length and a diagonal under 495 mm (19.5 in). Round tube is Φ40-Φ360 mm and square tube 40 × 40 to 360 × 360 mm.

02 How heavy and how long can a piece be on the TX3?

The maximum loading capacity for a single piece is 1,600 kg (3,527 lb). HSG states that the servo follow-up support and the follow-up supporting plate support complete loading and unloading of 12m-long tubes. The parameter table itself has no length row.

03 What is the difference between the TX3 and the TX3 PRO?

Speed, in the table. The TX3 is listed at 80 m/min maximum linkage speed and 0.8 G, the TX3 PRO at 100 m/min and 1.0 G. Tube sizes and the 1,600 kg (3,527 lb) capacity are the same, and bevel cutting and the twin chuck are optional on both.

04 Is bevel cutting standard on the TX3?

No. Bevel cutting is marked optional, and the 3D cutting head is listed as optional as well. With it, HSG describes cutting within a ±45° bevel range for joint preparation. HSG also notes that all configuration functions are provided according to customer demand.