Fryer MC-24L
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
Accuracy
How much does the Fryer MC-24L cost?
Price estimate
We do not have a price for the Fryer MC-24L that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Fryer MC-24L is the compact entry to the MC-L linear way machining centers: 24 x 16 x 17 in (610 x 406 x 432 mm) of travel on a floor area of 83 x 76 in (2,108 x 1,930 mm). It is a small machine with the fast hardware of the series, a 10,000 rpm Big Plus CAT 40 spindle, a 30 station high speed arm type tool changer and 1,450 ipm (36.8 m/min) rapids on all three axes.
Short travels and fast axes go together well. On parts that fit a 16.5 x 27.5 in (419 x 699 mm) table most of the cycle is tool changes and short positioning moves, and that is where a 1.5 seconds tool change and roller type linear ways pay back. The cutting feed rate reaches 1,200 ipm (30.5 m/min).
The spindle motor is 20 hp (14.9 kW) peak with 100 ft-lb (136 Nm) at 350 rpm. That is the smaller of the two motors in the series; the MC-45L and MC-60L carry 30 hp (22.4 kW). For aluminium, plastics and light steel work in this envelope it is ample, and faster spindles of 12,000 rpm and 15,000 rpm in-line, or 21,000 rpm and 30,000 rpm electric spindles in a smaller 30-size taper, are on the options sheet.
Limits to note: the table has 3 T-slots and is rated 2,000 lb (907 kg), the door opens 28 in (711 mm), and spindle nose to table is 21 to 4 in (533 - 102 mm). The machine weighs 7,900 lb (3,583 kg) and stands 102 in (2,591 mm) tall in operation.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 24 in (610 mm) |
| Y Axis Travel | 16 in (406 mm) |
| Z Axis Travel | 17 in (432 mm) |
| Ballscrew Diameter | 1.57 in (40 mm) |
| Max Table Load | 2,000 lb (907 kg) |
| Table Size | 16.5 x 27.5 in (419 x 699 mm) |
| T-Slots | 3 / 0.708 in (18 mm) |
| Table Top to Floor | 28 in (711 mm) |
| Spindle Motor Power | 20 hp (14.9 kW) peak |
| Max Spindle Speed | 60 - 10,000 rpm (12K, 15K, 21K, 30K optional) |
| Spindle Torque | 100 ft-lb (136 Nm) at 350 rpm |
| Spindle Taper | Big Plus CAT 40 (BT option) |
| Distance Spindle Nose to Table | 21 - 4 in (533 - 102 mm) |
| Spindle Center to Column | 18 in (457 mm) |
| Tool Capacity | 30 station high speed arm type (40 option) |
| Tool Change Time | 1.5 seconds |
| Max Tool Diameter (full magazine) | 3.2 in (81 mm) |
| Max Tool Diameter (adjacent pockets empty) | 5.5 in (140 mm) |
| Max Tool Weight | 15.4 lb (7.0 kg) |
| Max Tool Length | 11.8 in (300 mm) |
| Positioning Accuracy | +/- 0.0002 in (0.0051 mm) |
| Repeatability | +/- 0.0001 in (0.0025 mm) |
| Resolution | 0.0001 in (0.0025 mm) |
| Rapid Traverse Xyz | 1,450 ipm (36.8 m/min) X, Y, Z |
| Cutting Feed Rate | 0.001 - 1,200 ipm (up to 30.5 m/min) |
| Servo Type | AC Digital Brushless |
| Axis Thrust | 4,000 lb (1,814 kgf) X, Y, Z |
| Air Requirement | 90 psi (6.2 bar), 5 cfm (142 L/min) |
| Coolant Capacity | 90 gal (341 L) |
| Coolant Flow | 9 gpm (34 L/min) |
| Door Opening Width | 28 in (711 mm) |
| Power Requirement | 40 A, 380-500 VAC, 3 phase (208-250 VAC optional) |
| Shipping Dimensions | 83 x 76 x 82 in (2,108 x 1,930 x 2,083 mm) |
| Machine Dimensions | 83 x 76 x 102 in (2,108 x 1,930 x 2,591 mm) |
| Machine Weight | 7,900 lb (3,583 kg) |
Specifications sourced from fryermachine.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 1,450 ipm (36.8 m/min) rapids on X, Y and Z with roller type linear ways
- 30 station high speed arm type tool changer with a 1.5 seconds tool change
- 10,000 rpm Big Plus CAT 40 spindle as standard
- Small 83 x 76 in (2,108 x 1,930 mm) floor area
- Cutting feed rate up to 1,200 ipm (30.5 m/min)
Limitations
- Travels are limited to 24 x 16 x 17 in (610 x 406 x 432 mm)
- Table has 3 T-slots and a 2,000 lb (907 kg) load rating
- 20 hp (14.9 kW) peak motor, against 30 hp (22.4 kW) on the MC-45L
- Door opening is 28 in (711 mm) wide
Best For
Frequently Asked Questions
01
Rapid traverse is 1,450 ipm (36.8 m/min) on X, Y and Z, the cutting feed rate runs up to 1,200 ipm (30.5 m/min) and the tool change takes 1.5 seconds. The spindle runs 60 - 10,000 rpm as standard.
02
The standard spindle is Big Plus CAT 40 at 60 - 10,000 rpm with 20 hp (14.9 kW) peak. The options sheet lists 12,000 rpm and 15,000 rpm in-line spindles, and 21,000 rpm and 30,000 rpm electric spindles in a 30-size taper, which include conversion of the ATC.
03
Operating dimensions are 83 x 76 x 102 in (2,108 x 1,930 x 2,591 mm) and the machine weighs 7,900 lb (3,583 kg). Shipping height is 82 in (2,083 mm). Standard power is 40 A at 380-500 VAC, 3 phase, with 208-250 VAC optional.
04
16.5 x 27.5 in (419 x 699 mm) with 3 T-slots 0.708 in (18 mm) wide, rated 2,000 lb (907 kg) evenly distributed. The table top is 28 in (711 mm) from the floor, and the spindle centre is 18 in (457 mm) from the column.
More from Fryer
Other Vertical Machining Centers (VMC)
YCM NXV1380A
Kiwa Triple V22
Haas VF-3YT/50
Accuway UM-120B
