Feeler SVW-3223
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-3223 cost?
Price estimate
We do not have a price for the Feeler SVW-3223 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Feeler SVW-3223 has a table 3,000 mm (118.1 in) long and 2,000 mm (78.7 in) wide, with 3,200 mm (126.0 in) of X travel. Two metres is the widest table Feeler lists in the SVW series, and this is the three-metre model of the 23 group.
Set against the SVW-3222 the difference is small and specific: that table is 1,800 mm wide and this one 2,000 mm. Load, 12 ton, is the same, and so are X travel, the rapids, the spindle and the magazine row. A buyer choosing between the two is choosing a table width and whatever change in the cross travel comes with it, which should be read from the maker's own table.
A 3,000 × 2,000 mm surface takes large plates flat: press platens, fixture bases, vacuum chamber walls, mould plates for large tools. Because 12 ton is spread over more area than on the 22 model, the wider table does not mean heavier work. It means wider work.
Rapid traverse is 12 m/min (472 ipm) on X and 15 m/min (591 ipm) on Y and Z. The spindle is geared with two speeds, 6,000 rpm on BT/DIN/CAT 50, or the bracketed 8,000-15,000 rpm with #40. Z travel is 800 mm (31.5 in), optionally 1,000 mm (39.4 in). Tool capacity is listed as 24 (32/40/60).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 2,000 mm (78.7 in) |
| Max Table Load | 12 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 3,000 × 2,000 mm (118.1 × 78.7 in) table, the widest table size in the series
- 12 ton load rating, equal to the SVW-3222
- Geared spindle at 6,000 rpm with a faster bracketed alternative
- Largest magazine option holds 60 tools
Limitations
- No more load than the narrower SVW-3222: both are rated at 12 ton
- X rapid of 12 m/min (472 ipm)
- Y travel is not listed on this page, and it is the row that separates this model from its neighbours
Best For
Frequently Asked Questions
01
In the rows listed on this page, not at all: both show 3,200 mm of X travel, a 3,000 × 2,000 mm table and 12 ton. The difference lies in the Y-axis row of the maker's table, which is not listed here. Ask Feeler for the Y travel of each.
02
12 ton on the 3,000 × 2,000 mm table. The four-metre SVW-4223 in the same width is rated at 15 ton. Fixture weight counts against the rating.
03
A fully geared internal transmission with a two-speed gearbox, according to Feeler, for high torque at low speed. The table lists 6,000 rpm on a BT/DIN/CAT 50 taper, with 8,000-15,000 rpm and #40 in brackets.
04
Feeler says so. The series description calls it a full-travel supported table that eliminates overhang, for long-term stability and vibration absorption during machining. That matters most with a heavy part near the end of the 3,200 mm X stroke.
More from Feeler
Other Vertical Machining Centers (VMC)
Sharp KMA-2-CNC
DN Solutions VM 1260
Makino SLIM3n
Chiron DZ 12S
Ecoca VB-1000
