Feeler SVW-2113
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-2113 cost?
Price estimate
We do not have a price for the Feeler SVW-2113 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Feeler SVW-2113 is the smallest of the SVW gantry multi-face machining centers: 2,100 mm (82.7 in) of X travel over a 2,000 × 1,100 mm (78.7 × 43.3 in) table rated for 4 ton. It is also the quickest. Rapid traverse is 24 m/min (945 ipm) on X and Y and 20 m/min (787 ipm) on Z, figures no wider SVW table matches.
Feeler sells the series on heavy cutting. The structure is box-type with reinforced ribs, and the spindle is driven through a fully geared internal transmission with a two-speed gearbox, giving high torque at low speed. The standard spindle is listed at 6,000 rpm with a 50 taper in BT, DIN or CAT form. In brackets the table shows 8,000-15,000 rpm and #40, the lighter and faster alternative.
On a machine this size the 4 ton limit deserves a second look. It is half the 8 ton of the SVW-2217, whose table is the same length and only wider. A thick steel block the size of the table would exceed it, so the SVW-2113 suits plates, frames, fabrications and mould plates more than solid billets.
Z travel is 800 mm (31.5 in), with 1,000 mm (39.4 in) bracketed. The magazine holds 24 tools, or 32 or 40 as alternatives. Y travel is not given here; the cross travel and the clearance between the columns should be taken from the maker's drawing.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,100 mm (82.7 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,000 mm (78.7 in) |
| Table Width | 1,100 mm (43.3 in) |
| Max Table Load | 4 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Tool Capacity | 24 (32/40) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 24 m/min (945 ipm) rapids on X and Y, the fastest in the SVW series
- Geared two-speed spindle for high torque at low speed
- Choice of 50 taper at 6,000 rpm or the bracketed #40 at 8,000-15,000 rpm
- Table supported over its full travel, with no overhang
Limitations
- Table load is 4 ton, the lowest in the series
- Table width of 1,100 mm (43.3 in) limits wide plates
- Magazine options stop at 40 tools
- No spindle power, torque or machine weight on the series page
Best For
Frequently Asked Questions
01
2,000 mm long and 1,100 mm wide (78.7 × 43.3 in), with a maximum load of 4 ton. X travel is 2,100 mm (82.7 in), slightly longer than the table.
02
24 m/min (945 ipm) on X, 24 m/min on Y and 20 m/min (787 ipm) on Z. From the SVW-2217 upward every axis is listed at 15 m/min (591 ipm) or less.
03
The spindle-speed row reads 6,000 (8,000-15,000) rpm and the taper row BT/DIN/CAT 50 (#40). The 50 taper at 6,000 rpm is the standard geared spindle; the bracketed values are alternatives. Power and torque are not given.
04
The Y-axis figure is not listed on this page. Ask the maker for the Y stroke and the distance between the columns before planning parts close to the 1,100 mm table width.
More from Feeler
Other Vertical Machining Centers (VMC)
Colchester Storm VL-1690
Sharp SVL-2517SZ-F
