Feeler SVW-2822
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-2822 cost?
Price estimate
We do not have a price for the Feeler SVW-2822 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With a table 1,800 mm (70.9 in) wide, the Feeler SVW-2822 is the entry to the wider half of the SVW series. The table is 2,600 mm (102.4 in) long, X travel is 2,800 mm (110.2 in) and the load rating is 11 ton.
Width is what the buyer gets here. The SVW-2817 has the same table length and X travel on a 1,400 mm table rated at 9 ton. Choosing between them comes down to how wide the parts and their fixtures are, because a wider gantry means a longer crossrail and a larger machine for the same X.
It is the short one of its width class, and the only one in it with an X rapid of 15 m/min (591 ipm). Y and Z are 15 m/min too. The longer SVW-3222 and SVW-4222 are listed at 12 m/min on X.
Feeler builds the series as a box-type structure with reinforced ribs and supports the table over its full travel. The spindle is geared through two speeds and listed at 6,000 rpm on a BT/DIN/CAT 50 taper; 8,000-15,000 rpm and #40 are the bracketed alternatives. Z travel is 800 mm (31.5 in), or 1,000 mm (39.4 in). The magazine holds 24 tools as listed, with 32, 40 or 60 as options, and an automatic attachment change system is offered as an option for multi-face work.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,600 mm (102.4 in) |
| Table Width | 1,800 mm (70.9 in) |
| Max Table Load | 11 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,600 × 1,800 mm (102.4 × 70.9 in) table rated for 11 ton
- 15 m/min (591 ipm) on all three axes, the only model of its width with that X rate
- Geared 50-taper spindle at 6,000 rpm
- Tool magazine options from 24 to 60
Limitations
- Table length of 2,600 mm is the shortest in the 1,800 mm width
- Z travel is 800 mm (31.5 in) unless the 1,000 mm option is taken
- Y travel, power and torque are not listed on this page
Best For
Frequently Asked Questions
01
1,800 mm (70.9 in), with a length of 2,600 mm (102.4 in). The Y travel and the distance between the columns are not listed on this page, so check the widest part against the maker's layout drawing.
02
Table width and load. The SVW-2817 has a 1,400 mm wide table rated at 9 ton. The SVW-2822 has an 1,800 mm wide table rated at 11 ton. X travel, table length, rapids, spindle and magazine rows are the same.
03
15 m/min (591 ipm), the same as Y and Z. The SVW-3222, the next length in this width, is listed at 12 m/min (472 ipm) on X.
04
A geared spindle at 6,000 rpm with a BT/DIN/CAT 50 taper. Feeler describes a fully geared internal transmission with a two-speed gearbox. The alternative shown in brackets is 8,000-15,000 rpm with #40.
More from Feeler
Other Vertical Machining Centers (VMC)
Colchester Storm VL-610
DN Solutions VCF 5500 SL
Akira Seiki V5.5XP
GF Mikron MILL X 400
Haas VF-1
