Ermak Power-Bend Falcon 3100-220
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 3100-220 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 3100-220 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The table is the first thing that changes on the Ermak Power-Bend Falcon 3100-220. At 200 mm it is more than twice as wide as the 90 mm table of the Power-Bend Falcon 3100-175, because a 220 Ton (243 US tons) machine is expected to carry large V dies for plate.
Bending length is 3,100 mm (122 in), with 2,600 mm between the columns. Ermak fits an 18.5 kW motor and a 300 L oil tank at this tonnage.
The ram cycle is 180 mm/s in approach, 10 mm/s in work and 160 mm/s in return. That return is quicker than on the Power-Bend Falcon 3100-175, which lists 135 mm/s, so the heavier machine loses nothing in cycle time.
Opening figures are the series standard: 275 mm stroke, 550 mm daylight, 410 mm throat. Thick plate needs wide dies but rarely tall ones, so the standard daylight is usually enough; a part with deep return flanges is the case to check.
This model weighs 11,286 kg. It is 5,050 mm long, 2,250 mm wide and 2,700 mm high, with the table at 900 mm. The backgauge moves 800 mm in X and 250 mm in R. Heavy plate also strains the operator, and Ermak's option list includes pneumatic rear supports and a sheet extraction system for that reason.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 220 Ton (243 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 180 mm/s (7.09 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 160 mm/s (6.3 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 18.5 kW (24.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 200 mm (7.9 in) |
| Length | 5,050 mm (198.8 in) |
| Height | 2,700 mm (106.3 in) |
| Width | 2,250 mm (88.6 in) |
| Machine Weight | 11,286 kg (24,881 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 200 mm wide table for large V dies
- 220 Ton with a 160 mm/s ram return
- 18.5 kW motor and 300 L of oil
- Motorized CNC crowning for even angles over 3,100 mm
Limitations
- 11,286 kg and a 300 L oil fill raise installation effort
- Standard daylight stays at 550 mm
- Only 2 sheet supports and 2 finger blocks are listed
- 2,600 mm between columns, as on lighter 3,100 mm sizes
Best For
Frequently Asked Questions
01
Table width is 200 mm on this model. Higher tonnage is used with wider V openings, and a wide table supports those dies properly. The stroke and throat remain 275 mm and 410 mm.
02
11,286 kg, at 5,050 mm long, 2,250 mm wide and 2,700 mm high. The oil capacity of 300 L should be counted in when planning the first fill.
03
Stronger, yes. The Power-Bend Falcon 3100-260 has a 22 kW motor and a 220 mm table, though its rapid approach drops to 140 mm/s. This machine approaches at 180 mm/s.
04
Motorized crowning is listed for this size. Ermak also offers hydraulic crowning with multiple cylinders acting on a special lower beam as an option.
