Ermak Power-Bend Falcon 4100-400
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 4100-400 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 4100-400 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Ermak Power-Bend Falcon 4100-400 applies 400 Ton (441 US tons) along 4,100 mm (161.4 in). It weighs 26,100 kg and is built for plate that lighter four-metre machines cannot close.
Three things distinguish the 400 Ton frame. The throat is 510 mm deep. The table stands 1,000 mm high and is 240 mm wide. And the distance between the columns shrinks slightly to 3,550 mm (139.8 in), because the side frames are thicker.
The ram unit has a 375 mm stroke with 650 mm of daylight. Ermak lists 110 mm/s for approach, 8.4 mm/s for bending and 130 mm/s for the return. Motor power is 30 kW and the tank holds 400 L, no more than on the Power-Bend Falcon 4100-320, which weighs 21,800 kg. The added mass is all structure.
Plan the site early. The machine is 6,250 mm long, 2,700 mm wide and 3,500 mm high, and a 26,100 kg load needs a designed foundation. Plate goes onto a table one metre up, so a crane, a manipulator or sheet followers belong in the budget.
The backgauge has X travel of 800 mm, R travel of 250 mm and 2 finger blocks. Ermak lists motorized crowning.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 4,100 mm (161.4 in) |
| Bending Power | 400 Ton (441 US tons) |
| Distance Between Columns | 3,550 mm (139.8 in) |
| Y Rapid Speed | 110 mm/s (4.33 in/s) |
| Y Working Speed | 8.4 mm/s (0.33 in/s) |
| Y Return Speed | 130 mm/s (5.12 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 510 mm (20.1 in) |
| Table Height | 1,000 mm (39.4 in) |
| Table Width | 240 mm (9.4 in) |
| Length | 6,250 mm (246.1 in) |
| Height | 3,500 mm (137.8 in) |
| Width | 2,700 mm (106.3 in) |
| Machine Weight | 26,100 kg (57,540 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 400 Ton over a 4,100 mm bending length
- 510 mm throat depth without a special order
- 240 mm table width and 650 mm daylight
- 30 kW motor: no larger than on the next size down
Limitations
- Working speed 8.4 mm/s, approach 110 mm/s
- 26,100 kg requires a designed foundation
- 1,000 mm table height for heavy plate loading
- 3,550 mm between the columns
Best For
Frequently Asked Questions
01
26,100 kg. It is 6,250 mm long, 2,700 mm wide and 3,500 mm high. Foundation, transport route and lifting gear should be settled before the order.
02
510 mm as standard on this size, where most Falcons have 410 mm. Special throat depths up to 1,500 mm are offered by Ermak as an option for wider bending.
03
Yes. The approach is 110 mm/s, the working speed 8.4 mm/s and the return 130 mm/s. On thick plate the forming time dominates, so the effect on output is smaller than the figures suggest.
04
3,550 mm (139.8 in). Longer plates, up to the 4,100 mm bending length, are bent in front of the side frames within the 510 mm throat.
