DMG Mori Vertical Machining Centers (VMC)

DMG Mori NVX 7000

Est. $250,000 - $350,000 Specs verified 2026-10-02 · dmgmori.com Updated 2026-10-02

Image: dmgmori.com, DMG Mori

Key Specifications

X Travel

1,540 mm (60.6 in)

Y Travel

760 mm (29.9 in)

Z Travel

660 mm (26 in)

max workpiece length

1,700 mm (66.9 in)

max workpiece width

760 mm (29.9 in)

max workpiece height

600 mm (23.6 in)

How much does the DMG Mori NVX 7000 cost?

Estimated price range

Est.$250,000 - $350,000

Our best estimate for a vertical machining centers (vmc) in this class — not a quote from DMG Mori. Configuration moves it a long way.

Overview

The DMG MORI NVX 7000 is a large vertical machining center with 1,540 × 760 × 660 mm (60.6 × 29.9 × 26 in) of travel and a 2,000 kg (4,409.2 lb) workpiece limit. It accepts parts up to 1,700 mm (66.9 in) long, 760 mm (29.9 in) wide and 600 mm (23.6 in) high.

Slideways are used on all three axes. In general, sliding ways spread cutting loads over a large contact area and damp vibration better than rolling guides, at the cost of more friction. That matches what DMG MORI says about the basic structure: improved vibration damping and dynamic rigidity, together with a wide work envelope.

Accuracy over a 1,540 mm stroke depends on heat in the screws, and the listed equipment addresses it with ball screw core cooling and direct scale feedback. A Z-axis drop prevention function holds the head if power fails.

Three access figures are given in inches. The door opens 67.9 in. wide, a little more than the 1,700 mm (66.9 in) maximum workpiece length, so the longest part can go in square to the table. The table top is 39.4 in. high. A third figure, a distance from table of 12.8 in., is stated without saying what it is measured from, so ask before relying on it.

Among the NVX models the step is large: the NVX 5100 has 1,050 × 530 × 510 mm (41.3 × 20.9 × 20.1 in) of travel. DMG MORI's Highlights for the NVX 7000 state no spindle speed, power, taper or tool capacity.

Full Specifications

Parameter	Value
Max Workpiece Length	1,700 mm (66.9 in)
Max Workpiece Width	760 mm (29.9 in)
Max Workpiece Height	600 mm (23.6 in)
Max Workpiece Weight	2,000 kg (4,409.2 lb)
X-Axis Travel	1,540 mm (60.6 in)
Y-Axis Travel	760 mm (29.9 in)
Z-Axis Travel	660 mm (26 in)
Guideways	Slideways, all axes
Door Opening Width	67.9 in.
Table Top Height	39.4 in.
Scale Feedback	Direct scale feedback
Ball Screw Cooling	Ball screw core cooling

Specifications sourced from dmgmori.com — verified 2026-10-02

Strengths & Limitations

Strengths

1,540 × 760 × 660 mm (60.6 × 29.9 × 26 in) of travel with a 2,000 kg (4,409.2 lb) workpiece limit
Slideways on all axes, with improved vibration damping and dynamic rigidity named by DMG MORI
Ball screw core cooling and direct scale feedback
Door opening width of 67.9 in., wider than the 1,700 mm (66.9 in) maximum workpiece length
Power failure Z-axis drop prevention function

Limitations

Maximum workpiece height is 600 mm (23.6 in), less than the 660 mm (26 in) of Z travel
No spindle speed, power, taper or tool capacity is stated in DMG MORI's Highlights
The 12.8 in. distance from table is given without a reference point
Workpiece width is limited to 760 mm (29.9 in), the same as the Y travel

Best For

Large plates, mold bases and machine components up to 1,700 mm (66.9 in) long Heavy workpieces up to 2,000 kg (4,409.2 lb) Heavy cuts where slideways on all axes damp vibration Long cycles on large parts, supported by ball screw core cooling and direct scale feedback

Frequently Asked Questions

01 How large a workpiece can the NVX 7000 take?

Up to 1,700 mm (66.9 in) long, 760 mm (29.9 in) wide and 600 mm (23.6 in) high, with a maximum weight of 2,000 kg (4,409.2 lb). Travels are 1,540 mm (60.6 in) in X, 760 mm (29.9 in) in Y and 660 mm (26 in) in Z. Width matches the Y travel exactly, and length exceeds the X travel.

02 Why does the NVX 7000 use slideways on all axes?

DMG MORI states that slideways are used for all axes and links the basic structure to improved vibration damping and dynamic rigidity. On a machine that carries 2,000 kg (4,409.2 lb), damping is what keeps chatter down in heavy cuts. Rapid traverse and acceleration figures are not stated, so ask for them if non-cutting time matters.

03 How is the NVX 7000 loaded?

DMG MORI gives a door opening width of 67.9 in. and a table top height of 39.4 in. The door is slightly wider than the 1,700 mm (66.9 in) maximum workpiece length. A further figure, a distance from table of 12.8 in., is listed without its reference point. Whether the ceiling opens for a crane is not stated for this model.

04 How does the NVX 7000 compare with the NVX 5100?

The NVX 5100 has 1,050 mm (41.3 in) of X, 530 mm (20.9 in) of Y and 510 mm (20.1 in) of Z travel. The NVX 7000 has 1,540 mm (60.6 in), 760 mm (29.9 in) and 660 mm (26 in), so it is larger in every axis.

05 How does the NVX 7000 compare with the DMV 145 and DMV 200?

The DMV 145 has 1,450 × 700 × 550 mm and the DMV 200 has 2,000 × 700 × 550 mm of travel. The NVX 7000, at 1,540 × 760 × 660 mm, sits between them in X and exceeds both in Y and Z.