Salvagnini B3 100/3000
Key Specifications
max bending force
table length
distance between side frames
throat depth
max approach and return speed
bending speed
How much does the Salvagnini B3 100/3000 cost?
Price estimate
We do not have a price for the Salvagnini B3 100/3000 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A three-metre table at 100 tons: the Salvagnini B3 100/3000 is the lightest B3 press brake that takes standard 3,000 mm sheet. Its table length is 3,060 mm (120.5 in) and the distance between the side frames is 2,640 mm.
Compared with the B3 80/2000 the table is a metre longer and the throat grows from 350 mm to 435 mm, but the daylight is unchanged. Maximum stroke is 300 mm and the table-ram distance is 550 mm on both. So this model extends the length of part that can be bent, not its depth. For long, shallow profiles in thin sheet, such as trays, fascias and cover strips, that is the right trade.
At 1,725 mm it has the narrowest total width in the B3 table, with a total length of 4,270 mm and a height of 3,025 mm. Mass is 8,600 kg (18,959 lb) and average consumption is listed at 1 kWh. Approach and return run at up to 250 mm/s and bending at 15 mm/s.
A pair of front sliding shelves with a capacity of 120 kg supports the sheet. For particularly large or heavy pieces the FLW sheet follower is an option, each unit carrying up to 150 kg.
Full Specifications
| Parameter | Value |
|---|---|
| Max Bending Force | 100 Tons |
| Table Length | 3,060 mm (120.5 in) |
| Distance Between Side Frames | 2,640 mm (103.9 in) |
| Throat Depth | 435 mm (17.1 in) |
| Max Approach and Return Speed | 250 mm/s |
| Bending Speed | 15 mm/s (regulated by current standards) |
| Max Stroke | 300 mm (11.8 in) |
| Table Ram Distance | 550 mm (21.7 in) |
| Total Length | 4,270 mm (168.1 in) |
| Total Width | 1,725 mm (67.9 in) |
| Total Height | 3,025 mm (119.1 in) |
| Average Consumption | 1 kWh |
| Machine Weight | 8,600 kg (18,959 lb) |
Specifications sourced from salvagninigroup.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Table length of 3,060 mm (120.5 in) for standard three-metre sheet
- Narrowest total width in the range at 1,725 mm
- Throat depth of 435 mm, up from 350 mm on the B3 80/2000
- Fast ram: 250 mm/s approach and return
- Front sliding shelves with a capacity of 120 kg support the sheet
Limitations
- 100 tons spread over 3,060 mm limits thickness on full-length bends
- Maximum stroke is 300 mm, shorter than the 350 mm of the B3 135/3000
- Table-ram distance of 550 mm limits tool height
- The FLW sheet follower is optional
Best For
Frequently Asked Questions
01
The table length is 3,060 mm (120.5 in). The distance between the side frames is 2,640 mm, so a part longer than that has to stay within the 435 mm throat depth when it passes the frames.
02
Both have a 3,060 mm table and 2,640 mm between the side frames. The B3 135/3000 adds force, a 350 mm maximum stroke and a 600 mm table-ram distance, and weighs 11,700 kg. The B3 100/3000 is lighter at 8,600 kg (18,959 lb) and is listed at 1 kWh average consumption.
03
A pair of front sliding shelves with a capacity of 120 kg supports the sheet being bent. The optional FLW sheet follower is recommended for particularly large or heavy pieces; each FLW has a maximum capacity of 150 kg.
04
Total length is 4,270 mm, total width 1,725 mm and total height 3,025 mm. The mass is 8,600 kg (18,959 lb). Check the height against the building if the machine goes under a mezzanine or crane rail.
