Yawei PBG-110/3100
Key Specifications
bending force
bending length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBG-110/3100 cost?
Price estimate
We do not have a price for the Yawei PBG-110/3100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei PBG-110/3100 is the smallest of Yawei's PBG dual servo press brakes: 1,100 kN over a bending length of 3,100 mm (122.0 in), driven by two servo motors listed as 2 x 7.9 kW.
In the PBG design each cylinder has its own servo motor and oil pump. Yawei says this gives fast speed and high efficiency, and that its pressure control saves energy and oil. The oil system shows the consequence most clearly. The tank volume is 2 x 60 L, where the conventional PBC-110/3100 carries a 200 L tank, and the hydraulic circuit is pipeless, a layout Yawei says removes the risk of loose pipe joints and leaks.
The machine is light for its class at 7,000 kg (15,432 lb). The PBC-110/3100 weighs 8,500 kg (18,739 lb). Overall dimensions are 3,670 x 1,430 x 2,650 mm (144.5 x 56.3 x 104.3 in).
One figure runs the other way. Slider stroke is 215 mm (8.5 in) and mould height 550 mm (21.7 in), both lower than the 265 mm (10.4 in) and 600 mm (23.6 in) of the PBC-110/3100, so the PBG is the lesser machine for deep boxes and tall tools. Throat depth is 410 mm (16.1 in) and there is 2,600 mm (102.4 in) between columns. Slider speeds are 220 mm/s; 18 mm/s; 200 mm/s.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,100 kN |
| Bending Length | 3,100 mm (122.0 in) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 215 mm (8.5 in) |
| Die Setting Height | 550 mm (21.7 in) |
| Ram Speed | 220 mm/s; 18 mm/s; 200 mm/s |
| Main Motor Power | 2 x 7.9 kW |
| Oil Tank Volume | 2 x 60 L |
| Machine Dimensions | 3,670 x 1,430 x 2,650 mm (144.5 x 56.3 x 104.3 in) |
| Machine Weight | 7,000 kg (15,432 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Dual servo motor drive with dual oil pumps, 2 x 7.9 kW
- Small oil volume of 2 x 60 L
- Pipeless hydraulic structure to avoid loose joints and leaks
- Light for a 1,100 kN three-metre brake at 7,000 kg (15,432 lb)
- Slider speeds of 220 mm/s; 18 mm/s; 200 mm/s
Limitations
- Slider stroke of 215 mm (8.5 in); the PBC-110/3100 has 265 mm (10.4 in)
- Mould height of 550 mm (21.7 in)
- No crowning system is mentioned in the PBG description
- Energy savings are claimed without consumption figures
Best For
Frequently Asked Questions
01
Yawei describes dual servo motor drives with dual oil pump technology. The main motor power is listed as 2 x 7.9 kW and the oil tank volume as 2 x 60 L, which reads as one motor, pump and tank per side.
02
Bending pressure is 1,100 kN over a bending length of 3,100 mm (122.0 in). Distance between columns is 2,600 mm (102.4 in) and throat depth 410 mm (16.1 in).
03
Pressure and length are equal. The PBG-110/3100 weighs 7,000 kg (15,432 lb) with a 215 mm (8.5 in) stroke and 2 x 60 L of oil. The PBC-110/3100 weighs 8,500 kg (18,739 lb) with a 265 mm (10.4 in) slider travel and a 200 L tank.
04
Overall dimensions are 3,670 x 1,430 x 2,650 mm (144.5 x 56.3 x 104.3 in), and the machine weight is 7,000 kg (15,432 lb).
