AWEA MCP-10040
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA MCP-10040 cost?
Price estimate
We do not have a price for the AWEA MCP-10040 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Floor space is the argument for the AWEA MCP-10040. Its table is 10,000 x 2,800 mm (393.7 x 110.2 in) and stays where it is, while the columns travel 10,000 mm (393.7 in) in X. A machine that moved a table of that length would need room for the table at both ends of its stroke. AWEA puts the saving at 40 % less space than a fixed column machine.
Y travel is 4,400 mm (173.2 in) and Z is 1,400 mm (55.1 in). The spindle nose sits 800 ~ 2,200 mm (31.5 ~ 86.6 in) above the table top, which tells you what the machine is meant for: tall parts and attachment heads, not thin plate clamped low. For plate there is a closer fit in the same catalogue. The LG-10040 gantry brings the nose down to 200 ~ 1,200 mm (7.9 ~ 47.2 in), offers a 10,000 x 3,800 mm (393.7 x 149.6 in) table and runs X at 20 m/min (787 ipm), but it has 1,000 mm (39.4 in) of Z and a smaller magazine.
What the MCP adds is the multi-face package. A head changer is standard, together with a two positions ATC system, and AWEA makes its attachment heads in-house. The BBT50 magazine is 40T, with 60T as an option.
Rapids are 10 m/min (394 ipm) on all three axes and cutting feed runs 1 ~ 10 m/min (39 ~ 394 ipm). The low side structures leave the table open to a crane from above and from the sides.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 4,400 mm (173.2 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 10,000 x 2,800 mm (393.7 x 110.2 in) |
| Distance Spindle Nose to Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns with X Axis Covers | 3,700 mm (3,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter (full magazine) | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 3,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Fixed table: AWEA states that moving column machines use 40 % less space than fixed column machines
- 800 ~ 2,200 mm (31.5 ~ 86.6 in) from spindle nose to table, far more daylight than the 200 ~ 1,200 mm (7.9 ~ 47.2 in) of the LG-10040
- 40T magazine with a 60T option, and a spindle in BBT50
- Head changer and two positions ATC system included as standard
- Low side structures for crane loading of large workpieces
Limitations
- With the standard Z the nose stops 800 mm (31.5 in) above the table, so low parts need risers or long tooling
- X rapid of 10 m/min (394 ipm) against 20 m/min (787 ipm) on the LG-10040
- Table width is 2,800 mm (110.2 in); the LG-10040 table is 10,000 x 3,800 mm (393.7 x 149.6 in)
- Table load and accuracy are not stated in the specification table
Best For
Frequently Asked Questions
01
They share a 10,000 mm (393.7 in) X stroke and little else. The LG-10040 is a gantry for lower work: nose to table 200 ~ 1,200 mm (7.9 ~ 47.2 in), 1,000 mm (39.4 in) of Z, 20 m/min (787 ipm) in X and a CAT50 (7 / 24) spindle. The MCP-10040 is a five-face machine with 1,400 mm (55.1 in) of Z, 800 ~ 2,200 mm (31.5 ~ 86.6 in) of daylight, BBT50 and a standard head changer.
02
Standard distance from spindle nose to table top is 800 ~ 2,200 mm (31.5 ~ 86.6 in) with 1,400 mm (55.1 in) of Z travel. The optional Z of 1,600 mm changes that range to 600 ~ 2,200 mm. Between the columns the table lists 3,700 mm, and 3,500 mm with the X-axis covers.
03
The workpiece and table stand still, so the drives move the same mass whatever is loaded, and the machine does not need the table's length again as run-out. AWEA says the layout uses 40 % less space than a fixed column type. The X-axis carries dual linear scales, which the maker ties to keeping the two columns aligned.
04
The magazine is 40T as standard and 60T as an option. Each tool can be up to 400 mm (15.7 in) long and 20 kg (44 lb). Diameter is Ø125 mm (Ø4.9 in), or Ø200 mm (Ø7.9 in) when the neighbouring pockets are left empty. The magazine is attached to the column, so the tool change does not require an X move.
More from AWEA
Other 5-Axis Machining Centers
Fooke ENDURA 900LINEAR Compact
DN Solutions DBM 3050 U
Matsuura MX-520 PC7
YCM DCV4018A-5AX
Röders RFM600
