AWEA HVM-5032
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA HVM-5032 cost?
Price estimate
We do not have a price for the AWEA HVM-5032 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Table load is the reason to look at the AWEA HVM-5032. Rated for 18,000 kg (39,600 lb), it carries half as much again as the HVM-4032 or the HVM-5025, both of which stop at 12,000 kg (26,400 lb). The machine is a five-face bridge type machining center with a 5,020 x 2,400 mm (197.6 x 94.5 in) table and travels of 5,000 mm (196.8 in), 3,900 mm (153.5 in) and 1,000 mm (39.3 in) in X, Y and Z.
What that buys is the freedom to load dense parts. Engine blocks for large machinery, gearbox housings and thick tooling plates quickly exceed the rating of the lighter tables even when they fit the envelope. Here the columns are 3,200 mm (126.0 in) apart, so width is rarely the limit either.
Motion figures sit in the middle of the series. X rapid is 10,000 mm/min (394 ipm); Y and Z run at 12,000 / 10,000 mm/min (472 / 394 ipm). Feed for cutting spans 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM). The HVM-6032, the next length up, is held to 5,000 mm/min (196.9 IPM).
One dimension in the maker's table is worth querying. Width is given as 6,775 mm (267 in), while the HVM-4032 with matching column spacing is listed at 7,475 mm (294 in). Get a layout drawing before fixing the bay. Length is 12,775 mm (503 in), height 5,600 mm (220 in) and weight 55,000 kg (121,000 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,000 mm (196.8") |
| Y Axis Travel | 3,900 mm (153.5") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 5,020 x 2,400 mm (197.6" x 94.5") |
| Max Table Load | 18,000 kg (39,600 lb) |
| Distance Between Columns | 3,200 mm (126.0") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Yz | 12,000 / 10,000 mm/min (472 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter (full magazine) | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 12,775 mm (503") |
| Machine Width | 6,775 mm (267") |
| Machine Height | 5,600 mm (220") |
| Machine Weight | 55,000 kg (121,000 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 18,000 kg (39,600 lb) table load, against 12,000 kg (26,400 lb) on both the HVM-4032 and the HVM-5025
- 5,020 x 2,400 mm (197.6 x 94.5 in) table under a 3,200 mm (126.0 in) column opening
- Y and Z rapids of 12,000 / 10,000 mm/min (472 / 394 ipm) are listed for this model
- Cutting feed up to 8,000 mm/min (315.0 IPM), where the HVM-6032 is limited to 5,000 mm/min (196.9 IPM)
- Tools up to 25 kg (55 lb) and 400 mm (15.7 in) long in a 60-tool magazine
Limitations
- X rapid of 10,000 mm/min (394 ipm), down from 15,000 mm/min (590.6 IPM) on the HVM-4032
- Listed width of 6,775 mm (267 in) does not agree with the 7,475 mm (294 in) of the HVM-4032 on equal column spacing; verify before planning
- The 90 and 120 tool magazines are options
- Tool change time of 80 sec, slow for work with frequent tool calls
Best For
Frequently Asked Questions
01
The HVM-5032 table is rated at 18,000 kg (39,600 lb). The HVM-5025, with an equal 5,000 mm (196.8 in) X travel, is rated at 12,000 kg (26,400 lb). The table is also wider here, 5,020 x 2,400 mm (197.6 x 94.5 in) against the 5,020 x 2,010 mm (197.6 x 79.1 in) of the HVM-5025. Both machines are listed at 55,000 kg (121,000 lb).
02
5,000 mm (196.8 in) in X, 3,900 mm (153.5 in) in Y and 1,000 mm (39.3 in) in Z. The spindle nose sits 200 ~ 1,200 mm (7.9 ~ 47.2 in) above the table in the standard build, or 400 ~ 1,400 mm (15.7 ~ 55.1 in) with the optional arrangement.
03
The spindle nose is BT 50 (7 / 24) and the motor is rated 22 / 26 kW (30 / 35 HP). The table on this page has no spindle speed row; ask AWEA for the speed range in each spindle direction before judging cutter choice.
04
AWEA lists 12,775 mm (503 in) in length, 6,775 mm (267 in) in width and 5,600 mm (220 in) in height. The width equals that of the narrower HVM-5025 and is less than the 7,475 mm (294 in) listed for the HVM-4032, so ask for a foundation drawing and do not rely on the catalogue figure alone.
More from AWEA
Other 5-Axis Machining Centers
DMG Mori DMC 80 U duoBLOCK
Alzmetall GS 1000/5-T
DMG Mori DMU 160 p FD duoBLOCK
Brother SPEEDIO U500Xd2-100T
Huron MX 12 MT
