AWEA MEGA5 G10047
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 G10047 cost?
Price estimate
We do not have a price for the AWEA MEGA5 G10047 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Nothing in AWEA's 5-axis range is larger than the AWEA MEGA5 G10047. The gantry covers 10,000 mm (393.7 in) in X and 4,700 mm (185.0 in) in Y, with 1,200 mm (47.2 in) of Z, over a 10,000 x 4,800 mm (393.7 x 189.0 in) table, and the machine itself weighs 167,000 kg (368,166 lb).
Planning for it starts with the building. The weight is more than twice that of the MEGA5 G4037 at 72,000 kg (158,730 lb), before any workpiece is added at up to 2,500 kg/m² of table. Supplies are modest by comparison: air at 6 ~ 8 kg/cm², a 1,900 liter coolant tank, 150 liter of hydraulic oil and a 6 liter lubrication tank.
On a table of this area the tooling limits matter more than the travels. Every cutter has to fit a 20 T drum magazine, or the optional 40-tool version, and stay within 350 mm (13.8 in) of length and 15 kg (33 lb). Maximum tool diameter is listed as Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in). A long unattended program on a part this size can use up 20 pockets quickly, so the larger magazine deserves a look.
Accuracy follows the X length, as it does across the series: P = 0.050 mm over full travel and Ps = 0.038 mm under VDI. Feed rates match the other wide-frame models at 20 m / min in X, 12 m / min in Y and 10 m / min in Z. The head is the same B and C axis unit used throughout the MEGA5 line, listed with an HSK-A100 spindle at 12,000 rpm.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 4,700 mm (185.0 in) |
| Z Axis Travel | 1,200 mm (47.2 in) (opt. 1,400 mm) |
| Table Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Max Table Load | 2,500 kg / m² |
| Distance Between Columns | 5,800 mm (228.3 in) |
| Distance Spindle Nose to Table | TCH-30F = 200 ~ 1,400 mm (opt. 200 ~ 1,600 mm) TCH-20F = 355 ~ 1,555 mm (opt. 355 ~ 1,755 mm) |
| Distance 90 Deg Spindle Center to Table | TCH-30F = 550 ~ 1,750 (opt. 550 ~ 1,950 mm) TCH-20F = 665 ~ 1,865 mm (opt. 665 ~ 2,065 mm) |
| T-Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 12 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 20 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter (full magazine) | Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps = 0.038 mm |
| Coolant Tank Capacity | 1,900 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 6 ~ 8 kg/cm² |
| Machine Weight | 167,000 kg (368,166 lb) |
| Max Workpiece Length | 10,000 mm (393.7 in) |
| Max Workpiece Width | 4,700 mm (185.0 in) |
| Max Workpiece Height | 1,050 mm (41.3 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Largest envelope of the series: 10,000 mm (393.7 in) of X and 4,700 mm (185.0 in) of Y
- 10,000 x 4,800 mm (393.7 x 189.0 in) fixed table carrying 2,500 kg/m²
- X rapid of 20 m / min, unchanged from the shortest MEGA5 G model
- Simultaneous 5-axis head with HSK-A100, 12,000 rpm and 40 / 50 kW (53.6 / 67.1 hp)
- 1,900 liter coolant tank and a 150 liter hydraulic tank
Limitations
- 167,000 kg (368,166 lb) machine weight, the highest in the MEGA5 G series
- P = 0.050 mm and Ps = 0.038 mm under VDI, the widest figures in the series
- Only 20 T as standard for work of this size; the 40-tool magazine is optional
- Tool length is capped at 350 mm (13.8 in) and tool weight at 15 kg (33 lb)
- Y rapid of 12 m / min, against 15 m / min on the MEGA5 G10037
Best For
Frequently Asked Questions
01
AWEA lists a maximum workpiece length of 10,000 mm (393.7 in), a width of 4,700 mm (185.0 in) and a height of 1,050 mm (41.3 in). The table is 10,000 x 4,800 mm (393.7 x 189.0 in) with 28 x 200 mm T-slots and a rating of 2,500 kg/m², and the columns are 5,800 mm (228.3 in) apart.
02
167,000 kg (368,166 lb). The next machines down are the MEGA5 G8047 at 139,500 kg (307,540 lb) and the MEGA5 G10037 at 132,000 kg (291,005 lb). The foundation must carry that weight plus the workpiece, which the table accepts at up to 2,500 kg/m².
03
That depends on the program. The standard drum type magazine holds 20 tools and AWEA offers 40 as an option. Tools may be up to 350 mm (13.8 in) long and 15 kg (33 lb). The exchange takes place outside the machining area, which keeps chips and cutting fluid away from the tools and the changer.
04
AWEA states that the X-axis travel of the gantry type can be expanded according to customer requests, but the specification table stops at this model, so figures for a longer machine have to come from the maker. The rack and pinion X drive with dual servo motors is the element that makes such lengths practical.
05
Under VDI, P = 0.050 mm over full travel and Ps = 0.038 mm. Under JIS, ± 0.010 mm over full travel and ± 0.003 mm repeatability. The VDI values equal those of the MEGA5 G10037, which has the same X length on the narrower frame.
More from AWEA
Other 5-Axis Machining Centers
Zimmermann FZP37
DN Solutions DHF 8000 ST
Kitamura Mycenter-800G
FANUC RoboDrill a-D21MiB5 5-Axis
GF Machining Liechti go-Mill 600
