AWEA MEGA5 P6032
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 P6032 cost?
Price estimate
We do not have a price for the AWEA MEGA5 P6032 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 6,000 mm (236.2 in) of X travel the AWEA MEGA5 P6032 is as long as the fixed-bridge MEGA5 gets. Beyond this length AWEA's 5-axis machines are gantry designs. Y travel is 3,200 mm (126.0 in), Z is 1,000 mm (39.4 in) or optionally 1,200 mm, and the 6,020 x 2,400 mm (237.0 x 94.5 in) table is rated for 20,000 kg (44,092 lb), the highest table load in the P line.
A moving table of that size sets the pace. Cutting feed is 5 m / min and X rapid is 10 m / min; Y rapids at 12 m / min and Z at 10 m / min. Compare the MEGA5 G6037, where the gantry travels over a stationary part: it lists 20 m / min in X and a 10 m / min cutting feed across the same 6,000 mm. The MEGA5 G6037 weighs 84,500 kg (186,287 lb) against 60,500 kg (133,377 lb) here, and its magazine holds 20 T, not 40.
Accuracy does not separate the two. By the VDI method the MEGA5 P6032 is listed at P = 0.035 mm and Ps = 0.026 mm, and the MEGA5 G6037 carries the same pair of values. The JIS positioning figure is ± 0.010 mm over full travel.
So the case for this model is a part that is long, heavy and no wider than 2,400 mm (94.5 in), cut at feeds where 5 m / min is no handicap: steel, cast iron, deep roughing with the TCH-30F head. That head's HSK-A100 spindle is rated 40 / 50 kW (53.6 / 67.1 hp) at up to 12,000 rpm. Like every MEGA5 of 5 m and longer, the X axis has a ball screw vibration absorber.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (opt. 1,200 mm) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose to Table | TCH-30F = 200 ~ 1,200 mm (opt. 200 ~ 1,400 mm) TCH-20F = 200 ~ 1,200 mm (opt. 200 ~ 1,400 mm) |
| Distance 90 Deg Spindle Center to Table | TCH-30F = 550 ~ 1,550 mm (opt. 550 ~ 1,750 mm) TCH-20F = 510 ~ 1,510 mm (opt. 510 ~ 1,710 mm) |
| T-Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 10 m / min |
| Rapid Traverse Y | 12 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 5 m / min |
| Tool Capacity | 40 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter (full magazine) | Ø140 / Ø180 mm (Ø5.5 / Ø7.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.035 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps = 0.026 mm |
| Coolant Tank Capacity | 750 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 60,500 kg (133,377 lb) |
| Max Workpiece Length | 6,000 mm (236.2 in) |
| Max Workpiece Width | 2,400 mm (94.5 in) |
| Max Workpiece Height | 850 mm (33.5 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 20,000 kg (44,092 lb) table load, the highest of the MEGA5 P line
- 6,000 mm (236.2 in) of X travel on a fixed bridge weighing 60,500 kg (133,377 lb); the MEGA5 G6037 gantry weighs 84,500 kg (186,287 lb)
- VDI positioning accuracy of P = 0.035 mm, equal to the MEGA5 G6037
- 40 tools of up to 15 kg (33 lb), double the 20 T of the gantry series
- Table on four guide ways with a ball screw vibration absorber on X
Limitations
- Cutting feed of 5 m / min, the lowest in the line; the MEGA5 P5032 allows 8 m / min
- X rapid of 10 m / min, half the 20 m / min of the MEGA5 G6037
- Repeatability by the VDI method is Ps = 0.026 mm, against Ps = 0.018 mm on the MEGA5 P4032
- Maximum workpiece height of 850 mm (33.5 in) on a machine of this length
- No longer fixed-bridge model exists; more X means changing to the MEGA5 G series
Best For
Frequently Asked Questions
01
Both have 6,000 mm (236.2 in) of X and a 12,000 rpm HSK-A100 spindle. The MEGA5 P6032 moves the table, takes parts 2,400 mm (94.5 in) wide, has a 5 m / min cutting feed and weighs 60,500 kg (133,377 lb). The MEGA5 G6037 moves the gantry, has 3,700 mm (145.7 in) of Y, a 10 m / min cutting feed and 20 m / min X rapid, and weighs 84,500 kg (186,287 lb). Feed-sensitive or wide work points to the gantry.
02
High-feed finishing with small tools, mainly. The listed cutting feed is 5 m / min, while the shorter MEGA5 P4032 is listed at 10 m / min. Roughing and semi-finishing in steel or cast iron normally run well under that limit, so heavy cutting is not held back by it. Light-alloy contouring at speed is.
03
20,000 kg (44,092 lb). The table is 6,020 x 2,400 mm (237.0 x 94.5 in) with 28 x 200 mm T-slots, and AWEA supports it on four compound guide ways with a bed long enough that the table does not overhang. Workpiece limits are 6,000 mm (236.2 in) by 2,400 mm (94.5 in) by 850 mm (33.5 in).
04
The specification is for the TCH-30F, the high torque head with 314 Nm at 1,540 rpm. AWEA also prints clearances for the TCH-20F on this frame: its horizontal spindle centre line is 510 ~ 1,510 mm above the table, where the TCH-30F gives 550 ~ 1,550 mm. The TCH-20F series runs up to 24,000 rpm with a 55 kW motor.
05
A foundation for a 60,500 kg (133,377 lb) machine plus up to 20,000 kg (44,092 lb) of workpiece, compressed air at 5 ~ 8 kg/cm², and fluids for a 750 liter coolant tank, a 150 liter hydraulic tank and a 6 liter lubrication tank.
More from AWEA
Other 5-Axis Machining Centers
GROB G352
GF Machining Mikron MILL E 1900 U
Hartford HSA-736EAY
DMG Mori ULTRASONIC 80 eVo linear
Okuma MU-8000V
