Akira Seiki Vertical Machining Centers (VMC)

Akira Seiki SV760

Q: How much does the Akira Seiki SV760 cost?

The price estimate for the Akira Seiki SV760 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/akira-seiki-sv760#price; the request is passed to Akira Seiki or an authorised dealer.

Specs verified 2026-10-04 · akiraseiki.com Updated 2026-10-04

Key Specifications

Max Spindle

15,000 rpm

Spindle Taper

BT40

Tool Capacity

28T

Table Size

910 x 400 mm (35.8 x 15.8 in)

Spindle Power

25 HP (18.6 kW)

Accuracy

0.01 mm (0.00039 in)

How much does the Akira Seiki SV760 cost?

Price estimate

Uncertain

We do not have a price for the Akira Seiki SV760 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

Take a 30-inch vertical, give it a 15,000 rpm spindle and 48 m/min rapids, and the result is the Akira Seiki SV760. X travel is 760 mm (30 in), Y 445 mm (17.5 in), Z 520 mm (20.5 in), and the table is 910 x 400 mm (35.8 x 15.8 in).

The SV760 and the shorter SV550 are the two light machines of the SV series. Both have the 25 HP (18.6 kW) peak spindle, the 28T magazine and a 20 kVA power requirement; from the SV815 upward the series switches to a 42 HP (31.3 kW) spindle and 36T. So this is the largest SV model that still runs on the small electrical supply.

Feeds are the argument for it. Rapid feed is 48 / 48 / 36 m/min (1,890 / 1,890 / 1,417 ipm), cutting feed 24 / 24 / 24 m/min (945 / 945 / 945 ipm), and a tool change takes 1.9 s. On thin-walled aluminium parts with many short moves, those figures count for more than peak power.

The table takes 800 kg (1,764 lb) as a standard load and 960 kg (2,117 lb) maximum. Weight is 5,189 kg (11,440 lb), dimensions 3,145 x 2,200 mm (124 x 87 in). The spindle is oil chilled, chips leave on a chain type conveyor, and the coolant tank holds 250 L (66 gal).

Full Specifications

Parameter	Value
CNC Control	AKIRA Mi:845
X Axis Travel	760 mm (30 in)
Y Axis Travel	445 mm (17.5 in)
Z Axis Travel	520 mm (20.5 in)
Distance Spindle Nose to Table	75~595 mm (3~23.4 in)
Spindle Center to Column Cover	460 mm (18 in)
Table Size	910 x 400 mm (35.8 x 15.8 in)
T-Slots	18 mm x 80 mm pitch x 4 slots
Max Table Load	960 kg (2,117 lb)
Standard Table Load	800 kg (1,764 lb)
Spindle Motor Power	25 HP (18.6 kW)
Max Spindle Speed	15,000 rpm
Spindle Taper	BT40
Spindle Cooling	Oil chilling
Rapid Traverse Xyz	48 / 48 / 36 m/min (1,890 / 1,890 / 1,417 ipm)
Cutting Feed Rate	24 / 24 / 24 m/min (945 / 945 / 945 ipm)
Positioning Accuracy	0.01 mm (0.00039 in)
Repeatability	±0.003 mm (±0.00012 in)
Tool Capacity	28T
Max Tool Diameter (full magazine)	65 mm (2.6 in)
Max Tool Diameter Without Adjacent Tools	130 mm (5.1 in)
Max Tool Length	250 mm (9.8 in)
Max Tool Weight	7 kg (15.4 lb)
Tool Change Time	1.9 s
Coolant Tank Capacity	250 L (66 gal)
Chip Disposal	Chain Type Chip Conveyor
Air Pressure Requirement	0.5 MPa (72.5 psi)
Power Requirement	20 kVA
Machine Dimensions	3,145 x 2,200 mm (124 x 87 in)
Machine Weight	5,189 kg (11,440 lb)

Specifications sourced from akiraseiki.com — verified 2026-10-04

Strengths & Limitations

Strengths

760 mm (30 in) of X with a 15,000 rpm spindle
24 / 24 / 24 m/min (945 / 945 / 945 ipm) cutting feed
Only a 20 kVA supply is required
Table rated to 960 kg (2,117 lb) maximum

Limitations

25 HP (18.6 kW) peak spindle power
445 mm (17.5 in) of Y travel on a 400 mm deep table
250 L (66 gal) coolant tank for a high-speed machine
Tools limited to 65 mm (2.6 in) in diameter with a full magazine

Best For

Thin-walled aluminium parts with many short moves Two-vise high-speed production Graphite and copper electrodes Shops that need 15,000 rpm on a 20 kVA supply

Frequently Asked Questions

01 What are the travels of the SV760?

760 mm (30 in) in X, 445 mm (17.5 in) in Y and 520 mm (20.5 in) in Z. The table is 910 x 400 mm (35.8 x 15.8 in) with four 18 mm T-slots at 80 mm pitch.

02 Is the SV760 spindle the same as on the SV815?

The speed is, at 15,000 rpm on BT40. The power is not: the SV760 lists 25 HP (18.6 kW) peak and the SV815 lists 42 HP (31.3 kW). The SV815 also needs 35 kVA, against 20 kVA for the SV760.

03 How does the SV760 differ from the V2.5XP?

The two have the same travels and table. The V2.5XP runs at 10,000 rpm (V) or 12,000 rpm (XP) with a 2.2 s tool change; the SV760 runs at 15,000 rpm with a 1.9 s change and an oil-chilled spindle.

04 How much does the SV760 weigh?

5,189 kg (11,440 lb), on a footprint of 3,145 x 2,200 mm (124 x 87 in). Table load is 800 kg (1,764 lb) standard and 960 kg (2,117 lb) maximum.