Accurl eB-2585
Key Specifications
bending force
bending length
daylight opening
stroke
throat depth
approach speed
How much does the Accurl eB-2585 cost?
Price estimate
We do not have a price for the Accurl eB-2585 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With 85 ton on 2,500 mm (98.4 in), the Accurl eB-2585 is the size at which Accurl's electric press brake starts to overlap with ordinary hydraulic machines. It takes standard two-and-a-half-metre sheet and has enough force for everyday steel fabrication.
The frame is opened up for the larger work. Daylight is 470 mm (18.5 in), up from 420 mm (16.5 in) on the eB-2060, and the throat depth returns to 400 mm (15.7 in). Stroke is 150 mm (5.9 in).
Speed is where the size shows. A ball screw carrying 85 ton is geared for force, and approach and return are both 120 mm/s. That is a clear step down from the 160 mm/s of the eB-2060. Whether it matters depends on the parts: on a large panel the operator's handling time outweighs the ram's free travel.
Bending speed is still programmable through 0.2-50 mm/s.
No hydraulic tank is involved. Accurl lists no hydraulic oil or hydraulic filter and no valves or cylinders, and describes the machine as a noiseless all-electric servo. For a shop adding a mid-size brake near offices or in a clean area, that is the main case for this model.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 85 ton |
| Bending Length | 2,500 mm (98.4 in) |
| Daylight Opening | 470 mm (18.5 in) |
| Stroke | 150 mm (5.9 in) |
| Throat Depth | 400 mm (15.7 in) |
| Approach Speed | 120 mm/s |
| Return Speed | 120 mm/s |
| Bending Speed | 0.2-50 mm/s |
Specifications sourced from accurl.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 85 ton across 2,500 mm (98.4 in)
- 470 mm (18.5 in) of daylight
- 400 mm (15.7 in) throat depth
- All-electric drive that Accurl describes as noiseless
Limitations
- Approach and return speeds of 120 mm/s
- Stroke is 150 mm (5.9 in), no more than on the eB-2060
- The table omits weight, connected power and dimensions
Best For
Frequently Asked Questions
01
85 ton, 2,500 mm (98.4 in) bending length, 470 mm (18.5 in) daylight, 150 mm (5.9 in) stroke and 400 mm (15.7 in) throat depth. Approach and return are 120 mm/s and bending speed is 0.2-50 mm/s.
02
In free travel, yes. It moves at 120 mm/s where the eB-2060 moves at 160 mm/s. The bending speed range of 0.2-50 mm/s is the same.
03
The eB-30125, with 125 ton over 3,000 mm (118.1 in), 500 mm (19.7 in) of daylight and a 200 mm (7.9 in) stroke; the eB-30125 runs at 100 mm/s.
04
Accurl lists the ACCURL Pro CNC wave crowning system as standard equipment for the series. On a 2,500 mm (98.4 in) bed crowning affects angle consistency along the part, so confirm it in the order.
