Accurl eB-30125
Key Specifications
bending force
bending length
daylight opening
stroke
throat depth
approach speed
How much does the Accurl eB-30125 cost?
Price estimate
We do not have a price for the Accurl eB-30125 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Accurl eB-30125 is the largest machine in Accurl's eB catalogue table, an all-electric press brake of 125 ton with a bending length of 3,000 mm (118.1 in). It brings servo and ball screw drive to the three-metre class.
Every dimension is the largest of the series. Daylight is 500 mm (19.7 in), stroke 200 mm (7.9 in) and throat depth 460 mm (18.1 in). The stroke in particular sets it apart, since no smaller eB has more than 150 mm (5.9 in), as on the eB-2585.
It is also the slowest. Approach and return are 100 mm/s each. Bending speed spans 0.2-50 mm/s like the others. A buyer coming from a hydraulic three-metre machine should compare whole cycles, not approach speeds alone, since Accurl lists reduced dwell time among the advantages of the electric drive.
Where does an electric machine of this size fit? In shops bending three-metre sheet of light and medium gauge in volume, with energy use and oil handling counted as costs. Accurl puts consumption at 50% less than hydraulic press brakes.
The equipment Accurl lists for the series includes CNC wave crowning, a BGA-4 backgauge and a DELEM DA66T control, and at 3,000 mm (118.1 in) all three earn their place.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 125 ton |
| Bending Length | 3,000 mm (118.1 in) |
| Daylight Opening | 500 mm (19.7 in) |
| Stroke | 200 mm (7.9 in) |
| Throat Depth | 460 mm (18.1 in) |
| Approach Speed | 100 mm/s |
| Return Speed | 100 mm/s |
| Bending Speed | 0.2-50 mm/s |
Specifications sourced from accurl.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 125 ton over 3,000 mm (118.1 in) with no hydraulic system
- 200 mm (7.9 in) stroke, the longest in the eB table
- 500 mm (19.7 in) daylight and 460 mm (18.1 in) throat depth
- Accurl rates the drive at 50% less energy than hydraulic press brakes
Limitations
- Approach and return speeds of 100 mm/s are the lowest of the series
- 200 mm (7.9 in) of stroke is still short for deep box work
- No weight, motor power or floor dimensions are published in the table
Best For
Frequently Asked Questions
01
It has 125 ton of capacity and bends 3,000 mm (118.1 in). Daylight is 500 mm (19.7 in), stroke 200 mm (7.9 in) and throat depth 460 mm (18.1 in). Overall dimensions and weight are not in the table.
02
Accurl presents the whole eB series as 100% electric bending technology, driven by two ball screws with two servo motors and helical gearboxes. The 125 ton row belongs to that same table.
03
The eB-2585 has 85 ton over 2,500 mm (98.4 in) with a 150 mm (5.9 in) stroke and runs at 120 mm/s. This model has 125 ton over 3,000 mm (118.1 in) with a 200 mm (7.9 in) stroke and runs at 100 mm/s.
04
The standard equipment Accurl lists for the series is a CNC DELEM DA66T with 2D colour graphics, with DELEM Profile T2D offline software. The catalogue also shows other Delem and Cybelec controls.
More from Accurl
Other CNC Press Brakes
Amada HRB 1303
LVD PPEB 640/81
Durma AD-Servo 60400
Yawei PBH(A)-1600/12000
Amada HFE3 170-3
