Accurl eB-1340
Key Specifications
bending force
bending length
daylight opening
stroke
throat depth
approach speed
How much does the Accurl eB-1340 cost?
Price estimate
We do not have a price for the Accurl eB-1340 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Accurl eB-1340 is a short electric press brake with an unusually deep throat. Capacity is 40 ton, bending length 1,300 mm (51.2 in), and the throat depth is 400 mm (15.7 in).
Why does a 1,300 mm machine need that much throat? Because short machines are often asked to bend the edge of a part that is wider than the bed. With 400 mm (15.7 in) behind the bend line, a large panel can overhang the side frame and still take a deep flange. The eB-1235 has a throat of 260 mm (10.2 in) and cannot do the same job.
It is also quick. Approach speed is 190 mm/s, return speed 180 mm/s, and the bending speed can be set anywhere in 0.2-50 mm/s. Daylight is 420 mm (16.5 in) and stroke 140 mm (5.5 in).
Accurl builds the same tonnage on a longer bed as the eB-2040. Choose between them on part length alone: every other row of the table except the speeds is identical.
The servo-electric drive is described by Accurl as two low-noise ball screws guided by two servo motors and helical gearboxes, and the company puts the energy use at 50% less than hydraulic press brakes.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 40 ton |
| Bending Length | 1,300 mm (51.2 in) |
| Daylight Opening | 420 mm (16.5 in) |
| Stroke | 140 mm (5.5 in) |
| Throat Depth | 400 mm (15.7 in) |
| Approach Speed | 190 mm/s |
| Return Speed | 180 mm/s |
| Bending Speed | 0.2-50 mm/s |
Specifications sourced from accurl.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 400 mm (15.7 in) throat depth on a 1,300 mm (51.2 in) machine
- 190 mm/s approach speed and 180 mm/s return
- 40 ton, the same capacity as the longer eB-2040
- Accurl states the drive consumes 50% less energy than hydraulic press brakes
Limitations
- Stroke is 140 mm (5.5 in)
- Bending length stops at 1,300 mm (51.2 in)
- Catalogue table has no motor rating, weight or dimensions
Best For
Frequently Asked Questions
01
400 mm (15.7 in). The eB-1235 is listed with 260 mm (10.2 in), and the eB-2040 and eB-2585 match this model at 400 mm (15.7 in).
02
40 ton over a bending length of 1,300 mm (51.2 in). The eB-2040 has the same 40 ton over 2,000 mm (78.7 in), so the shorter machine can put more force into each metre of bend.
03
Approach 190 mm/s, return 180 mm/s, bending 0.2-50 mm/s. Accurl credits the servo-electric drive with high acceleration and deceleration and reduced dwell time.
04
A DELEM DA66T control with 2D colour graphics, a BGA-4 backgauge for X, R, Z1 and Z2, the ACCURL Pro CNC wave crowning system, a Lazersafe LZS-2 block laser and DELEM Profile T2D offline software. Check which items apply to this size.
