You Ji MCR35
Key Specifications
Max Spindle
Table Size
distance between columns
x axis travel
y axis travel
z axis travel
How much does the You Ji MCR35 cost?
Price estimate
We do not have a price for the You Ji MCR35 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The You Ji MCR35 is the first MCR size to reach a ten-metre table. This double column 5-face machining center spans 3,500 mm (137.8 in) between columns, and its 3,000 mm (118.1 in) wide table comes in lengths from 5,000 to 10,000 mm (196.9 to 393.7 in).
X-axis travel follows at 5,200 to 10,200 mm (204.7 to 401.6 in). Length on this scale changes how the machine is used. Two or three workpieces can be set up along the table, and the machine cuts one while the crane changes another, so long tables are often bought for pendulum loading as much as for long parts.
Loads are 20,000 to 25,000 kg (44,092 to 55,115 lb). Spread over a table of this area that is a moderate figure. It suits fabricated structures and frames, which are large but hollow, better than solid blocks.
Across the table, Y-axis travel is 3,860 mm (152.0 in), unchanged from the MCR30 although the columns stand further apart. Vertical reach combines 900 mm (35.4 in) of Z, or 1,200 mm (47.2 in), with a W-axis of 1,170 mm (46.1 in), 1,560 mm (61.4 in) or 1,950 mm (76.8 in) on the W and A cross rail types. The spindle runs at 3,000 rpm, or 2,500 rpm. Heads are exchanged by the automatic attachment changer.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 5,000-10,000 x 3,000 mm (196.9-393.7 x 118.1 in) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| X Axis Travel | 5,200-10,200 mm (204.7-401.6 in) |
| Y Axis Travel | 3,860 mm (152.0 in) |
| Z Axis Travel | 900 (1,200) mm (35.4 (47.2) in) |
| W Axis Travel | 1,170 (1,560/1,950) mm (46.1 (61.4/76.8) in), W/A type |
| Max Spindle Speed | 3,000 (2,500) rpm |
| Max Table Load | 20,000-25,000 kg (44,092-55,115 lb) |
Specifications sourced from image.youji.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Table lengths up to 10,000 mm (393.7 in), with X travel to 10,200 mm (401.6 in)
- 3,000 mm (118.1 in) table width inside 3,500 mm (137.8 in) of column spacing
- Load capacity of 20,000 to 25,000 kg (44,092 to 55,115 lb)
- W-axis cross rail travel up to 1,950 mm (76.8 in)
- 5-face capability through the automatic attachment changer
Limitations
- Y-axis travel of 3,860 mm (152.0 in) does not increase over the MCR30
- 25,000 kg (55,115 lb) is modest for a 3,000 mm (118.1 in) wide, ten-metre table
- Spindle speed is limited to 3,000 rpm
- Smallest table is 5,000 mm (196.9 in) long
Best For
Frequently Asked Questions
01
The table dimension is 5,000-10,000 x 3,000 mm (196.9-393.7 x 118.1 in), and the X-axis travel is 5,200-10,200 mm (204.7-401.6 in).
02
3,500 mm (137.8 in). The Y-axis travel is 3,860 mm (152.0 in), so the ram covers the 3,000 mm (118.1 in) table width with some extra stroke to each side.
03
Maximum loading weight is listed as 20,000-25,000 kg (44,092-55,115 lb). The range goes with the table lengths; confirm the rating for the length you need.
04
Z-axis travel is 900 mm (35.4 in), with 1,200 mm (47.2 in) in brackets. On the W and A types the cross rail adds a W-axis travel of 1,170 mm (46.1 in), with 1,560 mm (61.4 in) and 1,950 mm (76.8 in) as the bracketed strokes. The F type has a fixed cross rail.
05
When the part is wider or the Y reach is short. The MCR40 has 4,000 mm (157.5 in) between columns, a 3,500 mm (137.8 in) wide table and 5,260 mm (207.1 in) of Y-axis travel, with tables to 12,000 mm (472.4 in).
More from You Ji
Other Vertical Machining Centers (VMC)
Pinnacle DV1417
HNK HPM-45L (45x100)
Haas DC-1 Drill Center
Feeler SVW-4113
Sharp KMA-3-CNC
