DN Solutions Vertical Machining Centers (VMC)

DN Solutions VM 750 L

Est. $200,000 - $300,000 Specs verified 2026-10-02 · dn-solutions.com Updated 2026-10-02

Image: dn-solutions.com, DN Solutions

Key Specifications

X Travel

1,800 mm (71 in)

Y Travel

750 mm (30 in)

Z Travel

800 mm (31 in)

Max Spindle

6,000 rpm

Table Size

1,900 × 800 mm (75 × 31 in)

Rapid Traverse

20 m/min (787 ipm)

How much does the DN Solutions VM 750 L cost?

Estimated price range

Est.$200,000 - $300,000

Our best estimate for a vertical machining centers (vmc) in this class — not a quote from DN Solutions. Configuration moves it a long way.

Overview

The DN Solutions VM 750 L is the long-table version of the VM 750: X travel grows to 1,800 mm (71 in) and the table to 1,900 × 800 mm (75 × 31 in), while Y stays at 750 mm (30 in) and Z at 800 mm (31 in). Table load rises with it, to 3,500 kg (7,716 lb).

Put numbers on the difference and the VM 750 L has 20% more X stroke than the VM 750, which stops at 1,500 mm (59 in), for about 6% more machine weight: 14,800 kg (32,628 lb) against 14,000 kg (30,865 lb). The extra length shows on the floor in one direction only. DN Solutions lists the VM 750 L at 4,524 mm (178 in) by 5,500 mm (217 in), where the VM 750 is 4,900 mm (193 in) in that second dimension, and both stand 3,545 mm (140 in) high.

The reason to pick it is a part that is long but neither very heavy nor wide: long die shoes, profile tooling, or two medium mould halves set up in a row and machined in one program. If the part is also wide, the VM 960 is the next frame, with 2,000 mm (79 in) of X and 960 mm (38 in) of Y at 20,000 kg (44,092 lb), and with rapids of 16 m/min (630 ipm) instead of this machine's 20 m/min (787 ipm).

Spindle and feed figures are unchanged from the short machine. The table lists 6,000 rpm and 18.5 kW (25 hp). In the series description DN Solutions names a dual contact spindle as standard, gear-type spindles of 6,000 and 8,000 r/min and a built-in 12,000 r/min type, plus contour control, tool monitoring and optimal feed control for mould surfaces. Torque, taper and magazine capacity are not in the table.

Full Specifications

Parameter	Value
X-Axis Travel	1,800 mm (71 in)
Y-Axis Travel	750 mm (30 in)
Z-Axis Travel	800 mm (31 in)
Rapid Traverse Rate	20 m/min (787 ipm)
Max Spindle Speed	6,000 rpm
Spindle Motor Power	18.5 kW (25 hp)
Table Size	1,900 × 800 mm (75 × 31 in)
Max Table Load	3,500 kg (7,716 lb)
Floor Space Required	4,524 × 5,500 × 3,545 mm (178 × 217 × 140 in)
Machine Weight	14,800 kg (32,628 lb)

Specifications sourced from dn-solutions.com — verified 2026-10-02

Strengths & Limitations

Strengths

1,800 mm (71 in) of X travel, 20% more than the VM 750, with the same 750 mm (30 in) Y and 800 mm (31 in) Z
1,900 × 800 mm (75 × 31 in) table rated for 3,500 kg (7,716 lb)
Rapid traverse stays at 20 m/min (787 ipm); the wider VM 960 drops to 16 m/min (630 ipm)
Dual contact spindle listed as standard for the series, with 18.5 kW (25 hp) in the table
Same 4,524 mm (178 in) length and 3,545 mm (140 in) height as the VM 750, so only the 5,500 mm (217 in) width grows

Limitations

Y travel remains 750 mm (30 in); wide plates need the VM 960 with 960 mm (38 in)
6,000 rpm is the only spindle speed given in the table, which limits small-tool finishing rates
Width on the floor is 5,500 mm (217 in), about 12% more than the VM 750 at 4,900 mm (193 in)
Spindle torque, taper and tool capacity are not stated in the table

Best For

Long mould and die blocks up to 1,800 mm (71 in) in X Two mould halves fixtured in a row on the 1,900 mm (75 in) table Workpieces up to 3,500 kg (7,716 lb) with fixtures Steel cutting at up to 6,000 rpm with 18.5 kW (25 hp)

Frequently Asked Questions

01 What does the L add on the VM 750 L?

Length. X travel is 1,800 mm (71 in) instead of the VM 750's 1,500 mm (59 in), the table is 1,900 × 800 mm (75 × 31 in) instead of 1,600 × 800 mm (63 × 31 in), and the table rating is 3,500 kg (7,716 lb) instead of 3,000 kg (6,614 lb). Y travel, Z travel, spindle speed, spindle power and rapid traverse are the same on both machines.

02 Is the VM 750 L or the VM 960 the better fit for a long part?

It depends on width and weight. The VM 750 L covers 1,800 × 750 mm (71 × 30 in) and carries 3,500 kg (7,716 lb). The VM 960 covers 2,000 × 960 mm (79 × 38 in) and carries 4,000 kg (8,818 lb), but it weighs 20,000 kg (44,092 lb) against 14,800 kg (32,628 lb) and its rapids are 16 m/min (630 ipm) rather than 20 m/min (787 ipm). Z travel is 800 mm (31 in) on both.

03 What spindle does the VM 750 L use?

The table gives 6,000 rpm and 18.5 kW (25 hp). For the series as a whole DN Solutions lists a dual contact spindle as standard, gear-type versions at 6,000 and 8,000 r/min and a built-in version at 12,000 r/min. The table has no torque or taper row, so get those from the quotation.

04 How much floor space does the VM 750 L take?

4,524 mm (178 in) in length and 5,500 mm (217 in) in width, with a height of 3,545 mm (140 in). The machine weighs 14,800 kg (32,628 lb), and the table can add 3,500 kg (7,716 lb), so size the foundation for both together.

05 How fast does the VM 750 L move between cuts?

Rapid traverse is listed as a single figure, 20 m/min (787 ipm). Over an 1,800 mm (71 in) X stroke that is acceptable for mould work, where time is spent in the cut and not in positioning, but it is slower than the 30 m/min (1,181 ipm) X and Y rapids of the smaller VM 6500.