Vision Wide XMS-37
Key Specifications
Tool Capacity
x axis travel
y axis travel
z axis travel
ram size
distance spindle nose to table z 1500
How much does the Vision Wide XMS-37 cost?
Price estimate
We do not have a price for the Vision Wide XMS-37 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide XMS-37 passes a wider part than its Y travel would suggest. Maximum workpiece width is 4,100 mm (161.4 in) against 3,700 mm (145.7 in) of Y. On the XML-37, which has the same Y travel, the width is 3,600 mm (141.7 in).
So the columns of the XMS stand further apart for a given travel. A part can be wider than the spindle's reach, as long as the features to be machined lie within the Y stroke. Frames with wide flanges or outriggers, where only the central region is machined, are the obvious case.
The XMS is also the taller of the two. Z travel is 2,000 mm (78.7 in) as standard, with 1,500 mm, 1,800 mm and 2,200 mm as options, where the XML starts at 1,500 mm. Both use a 580x580 mm (22.8x22.8 in) ram.
X travel is built to length within 8,200(+1m)~60,200 mm, and the fixed table takes 5,000 kg/m2. The maker's XMS table does not give a usable table size.
The spindle is a 4,000rpm 2-step gear type with 22/26 kW (29.5/34.9 hp); 6,000 rpm gear and 8,000rpm and 12,000rpm built-in spindles are options. Rapid traverse is 20/20/12 m/min.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 8,200(+1m)~60,200 mm |
| Y Axis Travel | 3,700 mm (145.7 in) |
| Z Axis Travel | 2,000 mm (78.7 in) (1,500/1,800/2,200 mm (59.1/70.9/86.6 in) Opt.) |
| Ram Size | 580x580 mm (22.8x22.8 in) |
| Distance Spindle Nose to Table Z 1500 | 1,000~2,500 mm (39.4~98.4 in) |
| Distance Spindle Nose to Table Z 1800 | 700~2,500 mm (27.6~98.4 in) |
| Distance Spindle Nose to Table Z 2000 Std | 500~2,500 mm (19.7~98.4 in) |
| Distance Spindle Nose to Table Z 2200 | 500~2,700 mm (19.7~106.3 in) |
| Max Workpiece Width | 4,100 mm (161.4 in) |
| Max Table Load | 5,000 kg/m2 |
| Spindle Power Cont 30 Min | 22/26 kW (29.5/34.9 hp) |
| Spindle Speed 2 Step Gear | 4,000/6,000 rpm (Opt.) |
| Spindle Speed Built in Motor | 8,000 rpm (Opt.)/12,000 rpm (Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | 20/20/12 m/min |
| Tool Capacity | 32/40 pcs (Opt.)/60 pcs (Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Maximum workpiece width of 4,100 mm (161.4 in) on 3,700 mm (145.7 in) of Y travel
- Z travel of 2,000 mm (78.7 in) as standard
- 580x580 mm (22.8x22.8 in) ram
- Fixed table at 5,000 kg/m2
Limitations
- Y travel is shorter than the workpiece width, so the outer edges of a full-width part are out of reach
- Table size is not printed cleanly in the maker's table
- Y axis linear scale is optional
Best For
Frequently Asked Questions
01
4,100 mm (161.4 in). Y travel is 3,700 mm (145.7 in), so the part can be wider than the area the spindle reaches.
02
Both have 3,700 mm (145.7 in) of Y and a 580x580 mm (22.8x22.8 in) ram. The XMS-37 takes a 4,100 mm (161.4 in) wide part and has 2,000 mm (78.7 in) of standard Z; the XML-37 takes 3,600 mm (141.7 in) and starts at 1,500 mm of Z.
03
2,000 mm (78.7 in) as standard, with 1,500 mm, 1,800 mm and 2,200 mm as options. With the standard stroke the spindle nose to table distance is 500~2,500 mm (19.7~98.4 in).
04
A 4,000rpm 2-step gear type spindle as standard, with 22/26 kW (29.5/34.9 hp). Options are a 6,000 rpm box way type 2-step gear spindle and 8,000rpm or 12,000rpm built-in spindles.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Hardinge XR-760
Huron Tachyon 5 FT
DMG Mori CMX 600 V
Litz MV-1000
Hartford SMC-7
