Vision Wide SF-2627
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
max table load
spindle power cont 30 min
How much does the Vision Wide SF-2627 cost?
Price estimate
We do not have a price for the Vision Wide SF-2627 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide SF-2627 has 2,600 mm (102.4 in) of X travel and 2,700 mm (106.3 in) of Y, so its travels are almost equal, over a 2,500x1,800 mm (98.4x70.9 in) table that takes 9,000 kg (19,841 lb).
The standard equipment list is worth reading alongside those figures, because on a five-sided machine the supporting systems do more work. Chips fall from side faces as well as from the top, and the SF comes with a screw type chip conveyor on table side plus a caterpillar type chip conveyor and water tank. The spindle has its own cooling system and so does the cutting fluid. What is not included is coolant through the spindle: the 20/70 bar system is an option and is listed for the vertical spindle.
Control is the FANUC 0iMF PLUS. Three linear axes are what the series description promises, so any head attachment is positioned, not interpolated, as far as the SF page shows.
The Z axis runs on box ways and the spindle is the 2-step gear type with 18.5/22 kW (24.8/29.5 hp). Rapid traverse is X/Y/Z : 24/20/15 m/min. A floor-standing changer holds 32 tools as standard.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,600 mm (102.4 in) |
| Y Axis Travel | 2,700 mm (106.3 in) |
| Z Axis Travel Box Way | 800/1,020 mm (31.5/40.2 in)(Opt.) |
| Table Size | 2,500x1,800 mm (98.4x70.9 in) |
| Max Table Load | 9,000 kg (19,841 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | X/Y/Z : 24/20/15 m/min |
| Tool Capacity Floor Standing Vertical Tool Change | 32/40 pcs(Opt.) |
| Tool Capacity Floor Standing Vertical Horizontal Tool Change | 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Near-equal travels of 2,600 mm (102.4 in) and 2,700 mm (106.3 in)
- 9,000 kg (19,841 lb) on a 2,500x1,800 mm (98.4x70.9 in) table
- Screw type and caterpillar type chip conveyors are standard
- Spindle cooling system and cutting fluid cooling system are standard
Limitations
- Coolant through spindle system 20/70 bar is optional and listed for the vertical spindle
- Described by the maker as a 3-axis design
- Y rapid is 20 m/min against 24 m/min in X
Best For
Frequently Asked Questions
01
The standard list for the SF series includes the FANUC 0iMF PLUS controller, a 6,000rpm 2-step gear type spindle, spindle and cutting fluid cooling systems, a screw type chip conveyor on table side and a caterpillar type chip conveyor with water tank.
02
2,600 mm (102.4 in) in X and 2,700 mm (106.3 in) in Y. Z travel on the box way head is 800 mm, with 1,020 mm available as an option.
03
No. Coolant through spindle system 20/70 bar appears on the optional list, noted for the vertical spindle. A coolant through tool holder interface is also optional.
04
The SF-2623 has 2,300 mm (90.6 in) of Y travel and a 2,500x1,500 mm (98.4x59.1 in) table. The SF-2627 has 2,700 mm (106.3 in) of Y and a 2,500x1,800 mm (98.4x70.9 in) table. Both are rated for 9,000 kg (19,841 lb).
More from Vision Wide
Other Vertical Machining Centers (VMC)
Doosan DNM 4500
Okuma MCR-C
Hedelius FORTE 11-6200
HNK HPM-15H (15x40)
Feeler FDM-8228
