Vision Wide Vertical Machining Centers (VMC)

Vision Wide SF-2116

Q: How much does the Vision Wide SF-2116 cost?

The price estimate for the Vision Wide SF-2116 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-sf-2116#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

2,000x1,500 mm (78.7x59.1 in)

x axis travel

2,100 mm (82.7 in)

y axis travel

1,600 mm (63.0 in)

z axis travel box way

800 / 1,020 mm (31.5 / 40.2 in) (Opt.)

z axis travel linear way

800 / 1,000 mm (31.5 / 39.4 in) (Opt.)

max table load

8,000 kg (17,637 lb)

How much does the Vision Wide SF-2116 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide SF-2116 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The Vision Wide SF-2116 is the smallest double-column machining center in the SF series: 2,100 mm (82.7 in) of X, 1,600 mm (63.0 in) of Y and a 2,000x1,500 mm (78.7x59.1 in) table rated for 8,000 kg (17,637 lb). It is a 3-axis bridge machine, with the table travelling in X under a fixed pair of columns.

What comes as standard matters more here than on most machines, because the specification table is full of options. The base build is a 6,000rpm 2-step gear type spindle on a box way Z axis, a FANUC 0iMF PLUS controller and a 32 tools magazine with arm type ATC. Spindle power is 18.5/22 kW (24.8/29.5 hp), the continuous and short-time ratings. The 10,000 rpm and 12,000 rpm speeds in the table belong to optional direct-driven and built-in spindles on a linear way head, so a quotation for mold finishing will look different from one for steel roughing.

Z travel is 800 mm, with 1,020 mm on the box way head or 1,000 mm on the linear way head as options. Rapid traverse is 24 m/min in X and Y and 15 m/min in Z, and cutting feed runs from 1-10,000 mm/min. The SF-2616, SF-3116 and SF-4116 share this cross travel, spindle and Z; they lengthen the table and X travel only, so the choice between them comes down to part length.

Full Specifications

Parameter	Value
X Axis Travel	2,100 mm (82.7 in)
Y Axis Travel	1,600 mm (63.0 in)
Z Axis Travel Box Way	800 / 1,020 mm (31.5 / 40.2 in) (Opt.)
Z Axis Travel Linear Way	800 / 1,000 mm (31.5 / 39.4 in) (Opt.)
Table Size	2,000x1,500 mm (78.7x59.1 in)
Max Table Load	8,000 kg (17,637 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	6,000/4,000 rpm(Opt.)
Spindle Speed Linear Way Direct Driven	10,000 rpm(Opt.)/ 12,000 rpm(Opt.)
Spindle Speed Linear Way Built in	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xyz	XY：24 m/min Z：15 m/min
Tool Capacity Vertical Tool Change	32/40 pcs(Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

8,000 kg (17,637 lb) table load on the shortest table of the series, 2,000x1,500 mm (78.7x59.1 in)
Y travel of 1,600 mm (63.0 in) covers the full 1,500 mm table width
FANUC 0iMF PLUS controller and a 32 tools magazine with arm type ATC are standard
Rapid traverse of 24 m/min in X and Y, 15 m/min in Z

Limitations

Every spindle above the 6,000rpm 2-step gear type is an option
Standard Z travel is 800 mm; the 1,020 mm and 1,000 mm strokes are options
Coolant through spindle system 20/70 bar is optional, not part of the base machine

Best For

Mold bases and plates that fit a 2,000x1,500 mm (78.7x59.1 in) table, up to 8,000 kg (17,637 lb) Steel and cast iron milling with the geared 6,000 rpm spindle Shops needing double-column rigidity in the shortest SF footprint

Frequently Asked Questions

01 What are the travels of the Vision Wide SF-2116?

X is 2,100 mm (82.7 in) and Y is 1,600 mm (63.0 in). Z is listed as 800 / 1,020 mm (31.5 / 40.2 in) (Opt.) for the box way head and 800 / 1,000 mm (31.5 / 39.4 in) (Opt.) for the linear way head, so the longer Z strokes are extras.

02 Which spindle is standard on the SF-2116?

The standard accessory list names a 6,000rpm 2-step gear type spindle with a box way Z axis. A 4,000rpm geared spindle, 8,000/ 10,000rpm belt-driven spindles and 10,000(BT-50)/ 12,000(BT-40)rpm direct-driven spindles are options.

03 How much weight can the SF-2116 table take?

The maximum table load is 8,000 kg (17,637 lb) on a 2,000x1,500 mm (78.7x59.1 in) table. The SF-2616 with a 2,500x1,500 mm (98.4x59.1 in) table is rated for 9,000 kg (19,841 lb).

04 What control does the SF-2116 use?

Vision Wide lists the FANUC 0iMF PLUS controller as standard for the SF series. The accessory lists on the SF page name no alternative control, so ask the maker if another one is required.