Vision Wide MN-5032 / MN-5039
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide MN-5032 / MN-5039 cost?
Price estimate
We do not have a price for the Vision Wide MN-5032 / MN-5039 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Both ball screws of the Vision Wide MN-5032 / MN-5039 are long enough to need support. X travel is 5,100 mm (200.8 in) and Y travel is 3,200 mm (126.0 in) or 3,900 mm (153.5 in), and the maker fits an X, Y-axis ballscrew support device as standard where X is 4 m or more or Y is 3 m or more.
A ball screw is a slender shaft held at its ends. Past a certain length it sags in the middle under its own weight, and when it spins it wants to whip, like a skipping rope. Sag changes the effective pitch along the screw and whip limits the speed at which it can turn. Supports that travel with the nut or sit at intervals along the screw hold it on its axis. The X/Y rapid on this model is 12.5 m/min, and the support is part of what makes that usable over five metres.
It does nothing about heat, however. A long screw grows as it warms, and the remedy for that is XYZ-axis linear scale feedback, which is optional here.
The table is 5,000×2,450 mm (196.9×96.5 in) with a 20,000 kg (44,092 lb) rating. Cutting feed is 1-10,000 mm/min. The spindle is the box way 4,000rpm gear type, 18.5/22 kW (24.8/29.5 hp).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,100 mm (200.8 in) |
| Y Axis Travel | 3,200/ 3,900 mm (126.0/ 153.5 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 5,000×2,450 mm (196.9×96.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xy | 12.5 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Ballscrew support device standard on both X and Y
- 5,100 mm (200.8 in) of X with up to 3,900 mm (153.5 in) of Y travel
- 5,000×2,450 mm (196.9×96.5 in) table for 20,000 kg (44,092 lb)
- Cutting feed of 1-10,000 mm/min
Limitations
- Linear scale feedback is optional
- X/Y rapid of 12.5 m/min over five metres
- Same load rating as the narrower five-metre MN models
Best For
Frequently Asked Questions
01
Yes, on both axes. The X, Y-axis ballscrew support device is standard for an X axis of 4 m or more and a Y axis of 3 m or more; this pair has 5,100 mm (200.8 in) of X and at least 3,200 mm (126.0 in) of Y.
02
3,900 mm (153.5 in). The MN-5032 has 3,200 mm (126.0 in). Both share a 5,000×2,450 mm (196.9×96.5 in) table and 5,100 mm (200.8 in) of X travel.
03
XYZ-axis linear scale feedback is on the optional accessory list for the MN series. It is not included in the standard machine.
04
20,000 kg (44,092 lb). The MN-5023 and MN-5026, of the same 5,100 mm (200.8 in) X travel, have the same rating on narrower beams.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Brother SPEEDIO S300X1N
Makino F5
Kent CNC KVR-3618A
Feeler VMX-580APC
FANUC Robodrill α-D14LiBADV Plus Y500
