Vision Wide SF-4116
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
z axis travel linear way
max table load
How much does the Vision Wide SF-4116 cost?
Price estimate
We do not have a price for the Vision Wide SF-4116 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide SF-4116 stretches the 1,600 mm (63.0 in) Y-travel SF to its longest bed: 4,100 mm (161.4 in) of X travel and a 4,000x1,500 mm (157.5x59.1 in) table that carries 12,000 kg (26,455 lb).
One figure changes with the length. The three shorter machines in this group list 24 m/min for both X and Y, and the SF-3116 is one of them. Here the rapid traverse row reads X/Y/Z：18/24/15 m/min, so the long table moves more slowly than the saddle. On a part that fills the table, positioning moves along X take longer, and cycle-time estimates carried over from a shorter SF will be optimistic.
Everything above the table is unchanged. Spindle power is 18.5/22 kW (24.8/29.5 hp) with 22/26 kW (29.5/34.9 hp) as an option, the standard spindle is the 6,000 rpm 2-step gear type, and the cutting feed range is 1-10,000 mm/min. The magazine row lists 32/40 pcs(Opt.) on a vertical type tool change.
Chips are a practical concern at this length. The standard accessory list includes a screw type chip conveyor on table side and a caterpillar type chip conveyor with water tank, which is what a 4 m table needs to stay clear during long roughing cycles.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,100 mm (161.4 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel Box Way | 800 / 1,020 mm (31.5 / 40.2 in) (Opt.) |
| Z Axis Travel Linear Way | 800 / 1,000 mm (31.5 / 39.4 in) (Opt.) |
| Table Size | 4,000x1,500 mm (157.5x59.1 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Spindle Speed Linear Way Direct Driven | 10,000 rpm(Opt.)/ 12,000 rpm(Opt.) |
| Spindle Speed Linear Way Built in | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | X/Y/Z：18/24/15 m/min |
| Tool Capacity Vertical Tool Change | 32/40 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 4,100 mm (161.4 in) of X travel, the longest in the 1,600 mm (63.0 in) Y group
- 12,000 kg (26,455 lb) table load
- Screw type chip conveyor on table side and caterpillar type chip conveyor are standard
- Optional 22/26 kW (29.5/34.9 hp) spindle motor
Limitations
- X rapid is 18 m/min, against 24 m/min on the SF-3116
- A 4,000x1,500 mm (157.5x59.1 in) table is a long, narrow working area
- Z rapid is 15 m/min, the slowest of the three axes
- Coolant through tool holder interface is an option
Best For
Frequently Asked Questions
01
Vision Wide's table lists X/Y/Z：18/24/15 m/min for the SF-4116. The SF-3116, with a 3,000x1,500 mm (118.1x59.1 in) table, lists 24 m/min in X and Y. The page gives no reason; the longer, heavier table is the visible difference.
02
The table measures 4,000x1,500 mm (157.5x59.1 in) and the maximum table load is 12,000 kg (26,455 lb). X travel is 4,100 mm (161.4 in) and Y travel is 1,600 mm (63.0 in).
03
The standard accessories for the SF series include a screw type chip conveyor on table side and a caterpillar type chip conveyor with water tank. A cutting fluid cooling system is also on the standard list.
04
The table lists 32/40 pcs(Opt.) under vertical type tool change. The standard accessory list names a 32 tools magazine with arm type ATC, and 40/60 tools magazines with arm type ATC appear among the options.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Fidia VSE 1468
You Ji DCM18
Pinnacle LV209
Hedelius FORTE 9-2600
Colchester Storm VH-510
