Vision Wide SF-2623
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
max table load
spindle power cont 30 min
How much does the Vision Wide SF-2623 cost?
Price estimate
We do not have a price for the Vision Wide SF-2623 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
On the Vision Wide SF-2623 the cross axis is the slower of the two horizontal axes. The rapid traverse row reads X/Y/Z : 24/20/15 m/min, with 2,600 mm (102.4 in) of X travel and 2,300 mm (90.6 in) of Y.
That is the reverse of what the shorter-Y SF machines show. The SF-2616 lists 24 m/min for X and Y alike. A plausible reading is that the longer beam and the saddle running out beyond the table are the heavier moving mass on this version, but Vision Wide's page does not say so, and the figure matters more than the reason. If the work involves many cross moves, the cycle will run a little slower than on the SF-2616.
The table is 2,500x1,500 mm (98.4x59.1 in) for 9,000 kg (19,841 lb). Z travel on the box way head is 800 mm, with 1,020 mm optional for work with a head attachment.
This is a machine for heavy, slow, accurate cutting more than for speed. Its only listed spindle is the 2-step gear type, and the standard tool changer is a floor-standing unit with 32 tools. Spindle power is 18.5/22 kW (24.8/29.5 hp).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,600 mm (102.4 in) |
| Y Axis Travel | 2,300 mm (90.6 in) |
| Z Axis Travel Box Way | 800/1,020 mm (31.5/40.2 in)(Opt.) |
| Table Size | 2,500x1,500 mm (98.4x59.1 in) |
| Max Table Load | 9,000 kg (19,841 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | X/Y/Z : 24/20/15 m/min |
| Tool Capacity Floor Standing Vertical Tool Change | 32/40 pcs(Opt.) |
| Tool Capacity Floor Standing Vertical Horizontal Tool Change | 32 pcs(Opt.)/40 pcs(Opt.)/60 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,600 mm (102.4 in) by 2,300 mm (90.6 in) of X and Y travel
- 9,000 kg (19,841 lb) on a 2,500x1,500 mm (98.4x59.1 in) table
- X rapid of 24 m/min, the same as the shorter-Y machines
- Floor-standing type vertical tool change with 32 tools, 40 optional
Limitations
- Y rapid of 20 m/min is lower than on the SF-2616
- Geared spindle only: 6,000 rpm, or 4,000 rpm as an option
- Z travel of 800 mm unless the 1,020 mm option is taken
Best For
Frequently Asked Questions
01
X/Y/Z : 24/20/15 m/min. The SF-2616, with 1,600 mm (63.0 in) of Y travel, lists 24 m/min for both X and Y, so the longer cross travel comes with a slower Y axis.
02
A 2,500x1,500 mm (98.4x59.1 in) table rated for 9,000 kg (19,841 lb). X travel is 2,600 mm (102.4 in) and Y travel is 2,300 mm (90.6 in).
03
Its specification table lists no linear way head and no direct-driven or built-in spindle. The only spindle row is the box way 2-step gear type at 6,000/4,000 rpm(Opt.). Ask Vision Wide if a faster spindle is needed on this frame.
04
The box way head is listed at 800/1,020 mm (31.5/40.2 in)(Opt.). The series option list ties the longer stroke to use with an AC head attachment.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Okuma MCR-BV
Röders RXU2600
Hedelius FORTE 11-4600
