Vision Wide Vertical Machining Centers (VMC)

Vision Wide SF-2616

Q: How much does the Vision Wide SF-2616 cost?

The price estimate for the Vision Wide SF-2616 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-sf-2616#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

2,500x1,500 mm (98.4x59.1 in)

x axis travel

2,600 mm (102.4 in)

y axis travel

1,600 mm (63.0 in)

z axis travel box way

800 / 1,020 mm (31.5 / 40.2 in) (Opt.)

z axis travel linear way

800 / 1,000 mm (31.5 / 39.4 in) (Opt.)

max table load

9,000 kg (19,841 lb)

How much does the Vision Wide SF-2616 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide SF-2616 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

With 2,600 mm (102.4 in) of X travel over a 2,500x1,500 mm (98.4x59.1 in) table, the Vision Wide SF-2616 is the second size of the SF bridge-type machining center with 1,600 mm (63.0 in) of Y. Table load is 9,000 kg (19,841 lb).

X travel is longer than the table in this size, and so is Y against the 1,500 mm table width. That lets the spindle reach every edge of a plate that fills the table, which is not something the specification of every large machine allows. A plate the size of the table can be faced, drilled and profiled around its border in one clamping, as long as the clamps sit inside the outline.

How fast is it? Vision Wide describes the SF as a linear way design with rapid traverse reaching 24 m / min, and this model lists 24 m/min in X and Y with 15 m/min in Z. The cutting feed rate tops out at 10,000 mm/min. The spindle motor is 18.5/22 kW (24.8/29.5 hp), and a 22/26 kW (29.5/34.9 hp) motor is marked as an option.

For longer work the SF-3116 has a 3,000x1,500 mm (118.1x59.1 in) table; for wider work the SF-2620 keeps this X travel and offers 2,000 mm (78.7 in) of Y. The magazine is listed as 32/40 pcs(Opt.) with a vertical type tool change.

Full Specifications

Parameter	Value
X Axis Travel	2,600 mm (102.4 in)
Y Axis Travel	1,600 mm (63.0 in)
Z Axis Travel Box Way	800 / 1,020 mm (31.5 / 40.2 in) (Opt.)
Z Axis Travel Linear Way	800 / 1,000 mm (31.5 / 39.4 in) (Opt.)
Table Size	2,500x1,500 mm (98.4x59.1 in)
Max Table Load	9,000 kg (19,841 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	6,000/4,000 rpm(Opt.)
Spindle Speed Linear Way Direct Driven	10,000 rpm(Opt.)/ 12,000 rpm(Opt.)
Spindle Speed Linear Way Built in	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xyz	XY：24 m/min Z：15 m/min
Tool Capacity Vertical Tool Change	32/40 pcs(Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

X travel of 2,600 mm (102.4 in) is longer than the 2,500x1,500 mm (98.4x59.1 in) table, so the full table is within reach
9,000 kg (19,841 lb) table load
Optional 22/26 kW (29.5/34.9 hp) spindle motor above the 18.5/22 kW (24.8/29.5 hp) base rating
Cutting feed up to 10,000 mm/min with 24 m/min rapids in X and Y

Limitations

Y travel stops at 1,600 mm (63.0 in); the SF-2620 is needed for 2,000 mm (78.7 in)
Z rapid is 15 m/min, slower than the 24 m/min of X and Y
The 40 tool magazine is an option over the 32 tools magazine fitted as standard
Direct-driven and built-in spindles are listed only as options

Best For

Plates and die sets filling the 2,500x1,500 mm (98.4x59.1 in) table, machined edge to edge Workpieces up to 9,000 kg (19,841 lb) General double-column milling where 1,600 mm (63.0 in) of Y is enough

Frequently Asked Questions

01 What size table does the Vision Wide SF-2616 have?

The table measures 2,500x1,500 mm (98.4x59.1 in) and carries up to 9,000 kg (19,841 lb). X travel is 2,600 mm (102.4 in) and Y travel 1,600 mm (63.0 in), both longer than the matching table dimension.

02 What is the rapid traverse rate of the SF-2616?

The table gives 24 m/min for X and Y and 15 m/min for Z. Cutting feed is listed as 1-10,000 mm/min. Vision Wide's feature text describes the Z axis 15m rapid traverse as chosen for contour accuracy in high-speed mold machining.

03 Can the SF-2616 be ordered with a faster spindle?

Yes. The standard spindle is a 6,000rpm 2-step gear type. Options include 8,000/ 10,000rpm belt-driven spindles and 10,000(BT-50)/ 12,000(BT-40)rpm direct-driven spindles; the table also lists a built-in spindle at 10,000 rpm on the linear way head.

04 How does the SF-2616 differ from the SF-2620?

Both have 2,600 mm (102.4 in) of X travel and a 9,000 kg (19,841 lb) table load. The SF-2620 has 2,000 mm (78.7 in) of Y and a 2,500x1,800 mm (98.4x70.9 in) table, where the SF-2616 has 1,600 mm (63.0 in) of Y and a 2,500x1,500 mm (98.4x59.1 in) table.