Vision Wide SF-2620
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way
z axis travel linear way
max table load
How much does the Vision Wide SF-2620 cost?
Price estimate
We do not have a price for the Vision Wide SF-2620 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide SF-2620 pairs 2,600 mm (102.4 in) of X travel with 2,000 mm (78.7 in) of Y over a 2,500x1,800 mm (98.4x70.9 in) table. It is the mid-length machine in the wider of the two light SF frames.
Mold shops are the buyers Vision Wide names for this series, and the option list shows why. Beyond the standard geared spindle there are 8,000/ 10,000rpm belt-driven spindles and 10,000(BT-50)/ 12,000(BT-40)rpm direct-driven spindles. Note what that last entry implies: the 12,000 rpm speed comes with a BT-40 taper and the 10,000 rpm speed with BT-50, so the choice of top speed is also a choice of tool holder size. A shop that roughs with large cutters and finishes with small ones has to decide which end of the job the spindle is bought for.
Coolant delivery follows the same pattern. A spindle cooling system and a cutting fluid cooling system are standard. Coolant through spindle system 20/70 bar, a coolant through tool holder interface and an oil mist cooling device are all options.
Table load is 9,000 kg (19,841 lb). Rapid traverse is 24 m/min in X and Y, with 15 m/min in Z.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,600 mm (102.4 in) |
| Y Axis Travel | 2,000 mm (78.7 in) |
| Z Axis Travel Box Way | 800 /1,020 mm (31.5 /40.2 in) (Opt.) |
| Z Axis Travel Linear Way | 800 /1,000 mm (31.5 /39.4 in) (Opt.) |
| Table Size | 2,500x1,800 mm (98.4x70.9 in) |
| Max Table Load | 9,000 kg (19,841 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 6,000/4,000 rpm(Opt.) |
| Spindle Speed Linear Way Direct Driven | 10,000 rpm(Opt.)/ 12,000 rpm(Opt.) |
| Spindle Speed Linear Way Built in | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xyz | XY：24 m/min / Z：15 m/min |
| Tool Capacity Vertical Tool Change | 32/40 pcs(Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,500x1,800 mm (98.4x70.9 in) table with 2,600 mm (102.4 in) and 2,000 mm (78.7 in) travels
- Direct-driven spindle options of 10,000(BT-50)/ 12,000(BT-40)rpm for mold finishing
- Spindle cooling system and cutting fluid cooling system are standard
- 9,000 kg (19,841 lb) table load
Limitations
- The 12,000 rpm direct-driven option is tied to a BT-40 taper
- Coolant through spindle system 20/70 bar is optional
- Standard spindle speed is 6,000 rpm, which limits small-tool finishing
Best For
Frequently Asked Questions
01
The option list has 8,000/ 10,000rpm belt-driven spindles and 10,000(BT-50)/ 12,000(BT-40)rpm direct-driven spindles. The table also shows a built-in spindle at 10,000 rpm on the linear way head. The standard spindle is the 6,000rpm 2-step gear type.
02
Only as an option. Vision Wide lists a coolant through spindle system 20/70 bar for the vertical spindle, plus a coolant through tool holder interface. The base machine has a cutting fluid cooling system.
03
The table is 2,500x1,800 mm (98.4x70.9 in) and carries 9,000 kg (19,841 lb). Travels are 2,600 mm (102.4 in) in X and 2,000 mm (78.7 in) in Y, each longer than the table in that direction.
04
Yes. The SF-3120 keeps 2,000 mm (78.7 in) of Y and has 3,100 mm (122.0 in) of X with a 3,000x1,800 mm (118.1x70.9 in) table rated for 10,000 kg (22,046 lb).
More from Vision Wide
Other Vertical Machining Centers (VMC)
Okuma MCR-BIII
Victor Taichung Vcenter-P76APC
AWEA LP-3025
Röders RXU2000
Hedelius FORTE 11-3600
