Vision Wide MHN-10035 / MHN-10042
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide MHN-10035 / MHN-10042 cost?
Price estimate
We do not have a price for the Vision Wide MHN-10035 / MHN-10042 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The table of the Vision Wide MHN-10035 / MHN-10042 is supported for the whole of its stroke. Vision Wide describes a full stroke supported design with a thick, extra-wide bed, and says it increases table load capacity and the dynamic level of the workpiece in motion, for cutting stability and resistance to vibration.
On a short machine the point is minor. On a ten-metre one it is not. The table is 10,000×3,000 mm (393.7×118.1 in) and X travel is 10,100 mm (397.6 in). If the bed were no longer than needed to guide the table's centre, the ends of the table would overhang at the limits of travel, and a heavy part would sink a little as it moved outward. A bed that carries the table at every position keeps the part at one height from end to end.
That is how a 36,000 kg (79,365 lb) rating can be given without qualification.
Y travel is 3,500 mm (137.8 in) on the MHN-10035 and 4,200 mm (165.4 in) on the MHN-10042. Both axes have ball screw supports. X/Y rapid is 8 m/min and cutting feed 1-7,000 mm/min. The spindle motor is 22/26 kW (29.5/34.9 hp), with 30/37 kW (40.2/49.6 hp) as the option.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 10,100 mm (397.6 in) |
| Y Axis Travel | 3,500/ 4,200 mm (137.8/ 165.4 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 10,000×3,000 mm (393.7×118.1 in) |
| Max Table Load | 36,000 kg (79,365 lb) |
| Spindle Power Cont 30 Min | 22/26 kW (29.5/34.9 hp)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm (Opt.) |
| Cutting Feed Rate | 1-7,000 mm/min |
| Rapid Traverse Xy | 8 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Full stroke supported bed under a 10,000×3,000 mm (393.7×118.1 in) table
- 36,000 kg (79,365 lb) table load
- 10,100 mm (397.6 in) of X travel
- X, Y-axis ballscrew support device is standard
Limitations
- X/Y rapid of 8 m/min on a ten-metre axis
- Cutting feed of 1-7,000 mm/min
- No foundation or footprint data for a bed of this length
Best For
Frequently Asked Questions
01
Vision Wide describes a full stroke supported design with a thick, extra-wide bed structure that increases table load capacity and workpiece movement dynamic level. In practice the table is carried by the bed at every point of its travel.
02
10,000×3,000 mm (393.7×118.1 in) and 36,000 kg (79,365 lb). X travel is 10,100 mm (397.6 in), and the bed supports the table over all of it.
03
Both have 10,100 mm (397.6 in) of X travel. The MHN-10035 carries 36,000 kg (79,365 lb) on a 10,000×3,000 mm (393.7×118.1 in) table. The MN-10032 carries 26,000 kg (57,319 lb) on a 10,000×2,450 mm (393.7×96.5 in) table.
04
3,500 mm (137.8 in) and 4,200 mm (165.4 in) respectively, from the shared row 3,500/ 4,200 mm (137.8/ 165.4 in).
More from Vision Wide
Other Vertical Machining Centers (VMC)
Sharp TMV-MP-3
Makino V99L (50 Taper)
YCM NDC3016B
HNK GPM-20F
Feeler VBX-2200
