Vision Wide MN-5026 / MN-5033
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide MN-5026 / MN-5033 cost?
Price estimate
We do not have a price for the Vision Wide MN-5026 / MN-5033 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Z axis of the Vision Wide MN-5026 / MN-5033 comes in three constructions, and its two rapid rates tell them apart. With the box way head or the linear way head, Z rapid is 15 m/min. With the enclosed box ram, it is 12 m/min.
The box way head is the standard one. It runs on a single ballscrew with 920 mm of travel, or 1,020 mm as an option. The linear way head and the enclosed box ram both use dual ballscrews, and both are listed with Z travels of 1,000 mm, 1,200 mm or 1,400 mm, all optional. Of the three, the enclosed box ram is the heaviest section, a closed box around the ram that resists the side loads of an angle head at full extension, and its lower rapid reflects that mass.
For a five-face milling machine the choice follows the part. Low, heavy parts milled mostly from above: box way. Tall parts machined down their sides with an attachment: enclosed box ram and a long stroke.
The table is 5,000×2,450 mm (196.9×96.5 in) and holds 20,000 kg (44,092 lb). X travel is 5,100 mm (200.8 in), with 12.5 m/min of X/Y rapid. Y is 2,600 mm (102.4 in) on the MN-5026 and 3,300 mm (129.9 in) on the MN-5033.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,100 mm (200.8 in) |
| Y Axis Travel | 2,600/ 3,300 mm (102.4/ 129.9 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 5,000×2,450 mm (196.9×96.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xy | 12.5 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Three Z-axis constructions: box way, linear way and enclosed box ram
- Z travel up to 1,400 mm on dual ballscrews
- 5,000×2,450 mm (196.9×96.5 in) table for 20,000 kg (44,092 lb)
- Z rapid of 15 m/min on the box way and linear way heads
Limitations
- Enclosed box ram Z rapid is 12 m/min
- Only the 920 mm box way head is standard
- X/Y rapid of 12.5 m/min on the five-metre bed
Best For
Frequently Asked Questions
01
Box way head with single ballscrew: 920 mm, or 1,020 mm optional. Linear way and enclosed box ram heads with dual ballscrews: 1,000 mm, 1,200 mm or 1,400 mm, all optional.
02
15 m/min with the box way or linear way head and 12 m/min with the enclosed box ram. X/Y rapid is 12.5 m/min and cutting feed 1-10,000 mm/min.
03
5,000×2,450 mm (196.9×96.5 in) and 20,000 kg (44,092 lb). X travel is 5,100 mm (200.8 in), a little longer than the table.
04
The MN-5026 has 2,600 mm (102.4 in) and the MN-5033 has 3,300 mm (129.9 in). The table is 2,450 mm (96.5 in) wide under both.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Brother SPEEDIO R650X1N
YCM NSV66AM
Kent CNC KVR-2418A
Feeler VMX-580
FANUC Robodrill α-D14LiB5ADV Plus Y500
