Vision Wide MN-4026 / MN-4033
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide MN-4026 / MN-4033 cost?
Price estimate
We do not have a price for the Vision Wide MN-4026 / MN-4033 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Vision Wide MN-4026 / MN-4033 can be built around four spindle arrangements, and they divide by head. X travel is 4,100 mm (161.4 in), and the table is 4,000×2,450 mm (157.5×96.5 in) for 16,000 kg (35,273 lb).
On the standard box way head the spindle is a 2-step gear type: 4,000 rpm as built, 6,000 rpm as an option. On the linear way or enclosed box ram head there is the same pair of gear spindles, and in addition a direct driven spindle. The table gives that one as 10,000 rpm; the option list words it as 10,000/12,000 rpm.
The head therefore decides the top speed. A buyer who wants 10,000 rpm for finishing has to take the linear way or enclosed box ram head, and with it the dual-ballscrew Z axis and Z strokes of 1,000 mm, 1,200 mm or 1,400 mm. A buyer content with a geared spindle stays on the box way head, with 920 mm of Z or optionally 1,020 mm.
Motor power is a separate choice: 18.5/22 kW (24.8/29.5 hp) standard, 22/26 kW (29.5/34.9 hp) or 30/37 kW (40.2/49.6 hp) optional.
Y travel is 2,600 mm (102.4 in) on the MN-4026 and 3,300 mm (129.9 in) on the MN-4033. X/Y rapid is 18 m/min.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,100 mm (161.4 in) |
| Y Axis Travel | 2,600/ 3,300 mm (102.4/ 129.9 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 4,000×2,450 mm (157.5×96.5 in) |
| Max Table Load | 16,000 kg (35,273 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-10,000 mm/min |
| Rapid Traverse Xy | 18 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Gear spindles of 4,000 rpm or 6,000 rpm and a direct driven 10,000 rpm option
- Three motor ratings up to 30/37 kW (40.2/49.6 hp)
- 4,000×2,450 mm (157.5×96.5 in) table for 16,000 kg (35,273 lb)
- Z strokes to 1,400 mm with the optional heads
Limitations
- The direct driven spindle is not offered on the standard box way head
- The table and the option list word the direct driven speed differently
- X/Y rapid of 18 m/min at this length
Best For
Frequently Asked Questions
01
Box way head: 2-step gear spindle at 4,000 rpm, or 6,000 rpm optional. Linear way or enclosed box ram head: the same gear spindles or a direct driven spindle, listed at 10,000 rpm in the table. All but the first are options.
02
18.5/22 kW (24.8/29.5 hp) as standard, with 22/26 kW (29.5/34.9 hp) and 30/37 kW (40.2/49.6 hp) as options. Each pair is a continuous and a short-time rating.
03
X 4,100 mm (161.4 in). Y 2,600 mm (102.4 in), or 3,300 mm (129.9 in) on the MN-4033. Z 920 mm on the standard head, with longer strokes optional.
04
16,000 kg (35,273 lb) on a 4,000×2,450 mm (157.5×96.5 in) table. The MN-3026 carries 13,000 kg (28,660 lb) and the MN-5026 carries 20,000 kg (44,092 lb).
More from Vision Wide
Other Vertical Machining Centers (VMC)
YCM NSV106AS
Haas TM-2
Campro PV-5221
Feeler VMX-1100
FANUC Robodrill D74CS
