Vision Wide NF-8032 / NF-8039
Image: visionwide-tech.com, Vision Wide
Key Specifications
Table Size
x axis travel
y axis travel
z axis travel box way single ballscrew
z axis travel linear way enclosed box ram dual ballscrews
max table load
How much does the Vision Wide NF-8032 / NF-8039 cost?
Price estimate
We do not have a price for the Vision Wide NF-8032 / NF-8039 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Eight metres by almost four: the Vision Wide NF-8032 / NF-8039 has 8,100 mm (318.9 in) of X travel and 3,200 mm (126.0 in) or 3,900 mm (153.5 in) of Y. The table is 8,000×2,450 mm (315.0×96.5 in) and carries 24,000 kg (52,910 lb).
The Z axis deserves attention on a machine with this plan area, because big parts are often tall as well. The standard box way head has 920 mm of travel on a single ballscrew, with 1,020 mm optional. For more, the table lists linear way and enclosed box ram heads on dual ballscrews with 1,000 mm, 1,200 mm or 1,400 mm, all optional. The enclosed box ram trades some speed for its section: its Z rapid is 12 m/min, where the other heads list 15 m/min.
A ram that reaches 1,400 mm down while carrying a 90º head is a long lever. Driving it with two screws, one each side, keeps it from cocking as it moves, which is presumably why the long-travel heads are the dual-ballscrew ones.
Cutting feed is 1-7,000 mm/min and X/Y rapid is 8 m/min. Standard spindle power is 18.5/22 kW (24.8/29.5 hp), with 22/26 kW (29.5/34.9 hp) and 30/37 kW (40.2/49.6 hp) available.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 8,100 mm (318.9 in) |
| Y Axis Travel | 3,200/ 3,900 mm (126.0/ 153.5 in) |
| Z Axis Travel Box Way Single Ballscrew | 920 / 1,020 mm (36.2 / 40.2 in)(Opt.) |
| Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews | 1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.) |
| Table Size | 8,000×2,450 mm (315.0×96.5 in) |
| Max Table Load | 24,000 kg (52,910 lb) |
| Spindle Power Cont 30 Min | 18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.) |
| Spindle Speed Box Way 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear | 4,000 / 6,000 rpm(Opt.) |
| Spindle Speed Linear Way Enclosed Box Ram Direct Driven | 10,000 rpm(Opt.) |
| Cutting Feed Rate | 1-7,000 mm/min |
| Rapid Traverse Xy | 8 m/min |
| Rapid Traverse Z Box Way or Linear Way | 15 m/min |
| Rapid Traverse Z Enclosed Box Ram | 12 m/min |
| Tool Capacity Vertical Tool Change | 32 / 40 pcs (Opt.) / 60 pcs (Opt.) |
| Tool Capacity Floor Standing Vertical Tool Change | 32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.) |
| Tool Capacity Floor Standing Vertical Horizontal Tool Change | 32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.) |
Specifications sourced from visionwide-tech.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 8,100 mm (318.9 in) of X with up to 3,900 mm (153.5 in) of Y travel
- Optional Z travel of 1,000 mm, 1,200 mm or 1,400 mm on dual-ballscrew heads
- 24,000 kg (52,910 lb) table load
- Three spindle motor ratings up to 30/37 kW (40.2/49.6 hp)
Limitations
- Standard Z travel of 920 mm is short for parts of this plan size
- Enclosed box ram Z rapid is 12 m/min
- Cutting feed capped at 7,000 mm/min
Best For
Frequently Asked Questions
01
Box way head with single ballscrew: 920 mm, or 1,020 mm optional. Linear way and enclosed box ram heads with dual ballscrews: 1,000 mm, 1,200 mm or 1,400 mm, all optional. Z rapid is 15 m/min, or 12 m/min for the enclosed box ram.
02
X travel is 8,100 mm (318.9 in). Y travel is 3,200 mm (126.0 in) on the NF-8032 and 3,900 mm (153.5 in) on the NF-8039.
03
24,000 kg (52,910 lb) on an 8,000×2,450 mm (315.0×96.5 in) table. The rating is the same for all three eight-metre NF pairs.
04
Cutting feed of 1-7,000 mm/min and an X/Y rapid of 8 m/min. The six-metre NF-6032 lists 1-10,000 mm/min and 10 m/min.
More from Vision Wide
Other Vertical Machining Centers (VMC)
Okuma MA-650V
Victor Taichung Vcenter-G165
Röders RXP500
CHMER HM65(G)T
HNK HPF-25M (25x50)
