Tajmac-ZPS MCH800i FIVE AXIS
Key Specifications
Tool Capacity
Accuracy
Repeatability
x axis travel
y axis travel
z axis travel
How much does the Tajmac-ZPS MCH800i FIVE AXIS cost?
Price estimate
We do not have a price for the Tajmac-ZPS MCH800i FIVE AXIS that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Five-axis machining on a horizontal spindle is what the MCH800i FIVE AXIS offers. Tajmac-ZPS takes the MCH800i base, with its 1,000 x 1,050 x 1,200 mm travels, and replaces the B-axis table with a two-axis tilting rotary table: an A axis that tilts through 210° (±105°) and a C axis that rotates 360°. The brochure abbreviates the model as MCH800i FA.
The trade is plain in the load figures. The tilting table takes a 630 × 630 mm pallet rated for 700 kg, or a ø 800 mm clamping plate rated for 1,000 kg, where the three-axis-plus-B MCH800i carries 2,500 kg. Workpieces can be ø 800 × 800 mm on the pallet or ø 800 × 950 mm on the plate. You give up most of the weight capacity to gain access to five sides and to inclined features without angle fixtures.
With a horizontal spindle and a table that tilts toward it, chips fall away from the part and long tools reach into deep pockets, which is the usual argument for this layout on impellers, housings with angled ports and mould cores. The C axis turns at 42 rpm and the A axis at 8.3 rpm. Positioning error is 12 arc sec on A and 6 arc sec on C, with 4 arc sec and 3 arc sec repeatability. Rotary table locking torque is 4,000 Nm.
The linear side keeps the heavy machine's numbers: 50 m/min rapids, 20 kN of axial force in X and Z, 0.008 mm positioning error. Tool handling is unchanged as well, with 60 tools, lengths to 650 mm and a 2 s change for tools under 8 kg.
Pallet change is still automatic with two pallets and takes 22 s. The installed layout is 8,900 × 4,700 × 3,650 mm, a little longer than the base model, and the listed weight is 26,000 kg.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 1,000 mm (39.4 in) |
| Y Axis Travel | 1,050 mm (41.3 in) |
| Z Axis Travel | 1,200 mm (47.2 in) |
| A Axis Range | 210° (±105°) |
| C Axis Range | 360° |
| Cutting Feed Rate | 50 m/min |
| Rapid Traverse Xyz | 50 m/min |
| Acceleration | 5 m/s2 |
| C Axis Speed | 42 rpm |
| A Axis Speed | 8.3 rpm |
| Table Height From Floor | 1,670 / 1,520 mm (65.7 / 59.8 in) |
| Tilting Axis Height From Floor | 1,570 mm (61.8 in) |
| Distance Spindle Nose to A Axis | 250 / 100 mm (9.8 / 3.9 in) |
| Axial Force X | 20 kN |
| Axial Force Y | 10.5 kN |
| Axial Force Z | 20 kN |
| Positioning Accuracy | 0.008 mm (ISO 230-2) |
| Repeatability | 0.0034 mm (ISO 230-2) |
| A Axis Positioning Accuracy | 12 arc sec |
| C Axis Positioning Accuracy | 6 arc sec |
| A Axis Repeatability | 4 arc sec |
| C Axis Repeatability | 3 arc sec |
| Number of Pallets | 2 |
| Pallet Change Time | 22 s |
| Pallet Size | 630 × 630 mm (24.8 × 24.8 in) pallet; ø 800 mm (31.5 in) plate |
| Max Pallet Load | 700 kg (1,543 lb) on the pallet; 1,000 kg (2,205 lb) on the clamping plate (with clamping fixture) |
| Max Workpiece Size | ø 800 × 800 mm (31.5 × 31.5 in) on the pallet; ø 800 × 950 mm (31.5 × 37.4 in) on the clamping plate (dia × height) |
| Rotary Table Locking Torque | 4,000 Nm (2,950 lb-ft) |
| Tool Capacity | 60 (80, 100, 120 optional) |
| Tool Change Time | 3.5 s standard speed (tool weight > 8 kg); 2 s high speed (tool weight < 8 kg) |
| Max Tool Diameter (full magazine) | 125 mm (4.9 in) with adjacent tools; 250 mm (9.8 in) without adjacent tools |
| Max Tool Length | 650 mm (25.6 in) |
| Max Tool Weight | 30 kg (66 lb) SK50 and HSK100; 8 kg (18 lb) SK40 and HSK63, including holder |
| Max Weight of All Tools | 850 kg (1,874 lb) |
| Spindle Unit Iso 50 8000 RPM 30 Kw | 8,000 rpm; 20 / 30 kW (26.8 / 40.2 hp); 306 / 458 Nm (226 / 338 lb-ft) |
| Spindle Unit Iso 50 8000 RPM 43 Kw | 8,000 rpm; 28 / 43 kW (37.5 / 57.7 hp); 342 / 526 Nm (252 / 388 lb-ft) |
| Spindle Unit Iso 50 4500 RPM 25 Kw | 4,500 rpm; 17 / 25 kW (22.8 / 33.5 hp); 893 / 1,313 Nm (659 / 968 lb-ft) |
| Spindle Unit Iso 50 4500 RPM 46 Kw | 4,500 rpm; 33 / 46 kW (44.3 / 61.7 hp); 990 / 1,387 Nm (730 / 1,023 lb-ft) |
| Spindle Unit HSK A63 18000 RPM | 18,000 rpm; 25 / 31 kW (33.5 / 41.6 hp); 160 / 200 Nm (118 / 148 lb-ft) |
| Spindle Unit HSK A100 14000 RPM | 14,000 rpm; 25 / 37 kW (33.5 / 49.6 hp); 160 / 236 Nm (118 / 174 lb-ft) |
| Machine Dimensions | 8,900 × 4,700 × 3,650 mm (350.4 × 185.0 × 143.7 in) |
| Transport Dimensions | 7,950 × 3,400 × 3,340 mm (313.0 × 133.9 × 131.5 in) |
| Machine Weight | 26,000 kg (57,319 lb); transporting 25,000 kg (55,115 lb) |
Specifications sourced from tajmac-zps.cz — verified 2026-10-04
Strengths & Limitations
Strengths
- Tilting rotary table with A axis of 210° (±105°) and C axis of 360° on a horizontal machine
- Keeps the base travels of 1,000 x 1,050 x 1,200 mm and 50 m/min rapid traverse
- Works with a 630 × 630 mm pallet or a ø 800 mm clamping plate
- Automatic two-pallet changer retained, with a 22 s pallet change time
- Direct measuring on the rotary axes: 12 arc sec on A and 6 arc sec on C
Limitations
- Load drops to 700 kg (1,543 lb) on the pallet, against 2,500 kg on the MCH800i
- A axis speed is 8.3 rpm, slow for continuous five-axis contouring
- Workpiece limited to ø 800 × 800 mm on the pallet
- Layout grows to 8,900 × 4,700 × 3,650 mm
Best For
Frequently Asked Questions
01
The table. The MCH800i has a B-axis rotary table with 800 × 800 mm pallets and a 2,500 kg load. The FIVE AXIS model has a tilting rotary table with A and C axes, a 630 × 630 mm pallet or ø 800 mm plate, and loads of 700 kg on the pallet or 1,000 kg on the clamping plate. Linear travels stay the same.
02
The A axis tilts through 210° (±105°) at a maximal speed of 8.3 rpm. The C axis rotates 360° at up to 42 rpm. Positioning error to ISO 230-2 is 12 arc sec on A and 6 arc sec on C; repeatability is 4 arc sec and 3 arc sec.
03
ø 800 × 800 mm (diameter × height) on the pallet and ø 800 × 950 mm on the clamping plate. The working area of the table in horizontal position is 1,670 / 1,520 mm above the floor and the tilting axis is 1,570 mm above the floor.
04
Yes. The automatic pallet changer has two pallets and a change time of 22 s, slightly longer than the 20 s of the MCH800i. The maker shows the five-axis table with automatic pallet changer as a standard arrangement in the brochure.
05
The range brochure lists ISO 50 units at 8,000 rpm and 4,500 rpm, an HSK-A63 unit at 18,000 rpm and an HSK-A100 unit at 14,000 rpm. The cassette magazine holds 60 tools, with 80, 100 or 120 optional, up to 650 mm long and 30 kg in the 50-size tapers.
