SCM Record 270 CNC
This model was not found in SCM Group's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Spindle Power
Accuracy
working area x y z
max spindle speed
feed rate
control system
How much does the SCM Record 270 CNC cost?
Estimated price range
Our best estimate for a cnc router in this class — not a quote from SCM Group. Configuration moves it a long way.
Overview
The SCM Record 270 CNC is listed as a CNC router for panel processing with a working area of 4,260 × 2,700 × 200 mm, an 18 kW spindle and a maximum spindle speed of 24,000 RPM. It is not in SCM's current lineup, so treat the listed figures as a starting point and check them against the machine itself.
The working area is wide and shallow. At 4,260 × 2,700 mm the table takes large sheets, or several smaller ones side by side, while 200 mm of Z confines the work to panels and low parts. Holding is by vacuum zones, with T-slots as secondary clamping for parts that vacuum alone will not keep still.
Feed rate is listed as up to 100,000 mm/min in rapid and 30,000 mm/min in cutting, so the machine covers its long table quickly between cuts. The 18 kW spindle sits just above the 17 kW listed for the Accord 50 FX and is double the 9 kW (12 HP) of the Accord 30 FX. Positioning accuracy is listed as ±0.1 mm, which suits panel sizing but should be weighed against any close-fitting joints. Control is SCM MAESTRO, described as PC-based, and weight is approx. 6,500 kg.
Full Specifications
| Parameter | Value |
|---|---|
| Working Area X Y Z | 4,260 × 2,700 × 200 mm (panel processing) |
| Spindle Motor Power | 18 kW |
| Max Spindle Speed | 24,000 RPM |
| Feed Rate | Up to 100,000 mm/min (rapid); 30,000 mm/min (cutting) |
| Positioning Accuracy | ±0.1 mm |
| Control System | SCM MAESTRO (PC-based) |
| Table Type | Vacuum zones with T-slot secondary clamping |
| Machine Weight | Approx. 6,500 kg |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Working area of 4,260 × 2,700 × 200 mm for large panels
- 18 kW spindle at up to 24,000 RPM
- Rapid feed of up to 100,000 mm/min, with 30,000 mm/min in cutting
- Vacuum zones backed by T-slot secondary clamping
Limitations
- Z of 200 mm limits the machine to panels and low parts
- Positioning accuracy is listed as ±0.1 mm
- The table lists no tool changer or tool capacity
Best For
Frequently Asked Questions
01
The listed working area is 4,260 × 2,700 × 200 mm, described as panel processing. The Z figure of 200 mm has to cover panel thickness and tool clearance together, so the machine is for sheet material and low parts.
02
The feed rate row lists up to 100,000 mm/min in rapid and 30,000 mm/min in cutting. Whether the cutting figure is reachable depends on the tool and material, with the 18 kW spindle and 24,000 RPM as the limits on the spindle side.
03
The table type is listed as vacuum zones with T-slot secondary clamping. Vacuum holds sheets flat; the T-slots take mechanical clamps or fixtures for parts with too little surface for vacuum.
Community Discussions
Links to community discussions. Summaries are editorial — visit the original thread for full context.
