Onsrud 240GW10
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 240GW10 cost?
Price estimate
We do not have a price for the Onsrud 240GW10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 240GW10 puts a ten-foot bridge over a twenty-foot bed. Table Y is 120 in (3,048 mm) and table X is 240 in (6,096 mm), so the working area is twice as long as it is wide.
Ten feet of Y is a material decision. Aluminum plate, acrylic and composite sheet are supplied in ten-foot lengths, and on this table such a sheet can lie across the machine as well as along it. Four five-by-ten sheets fit crosswise. Boat and vehicle panels that are too wide for an eight-foot table sit flat here.
A wider bridge is a longer beam, and Onsrud's description of the series is relevant: one-piece vertical steel columns, a helical rack and a drive on each side of the gantry. The frame of the 240GW10 is 200 in (5,080 mm) wide. It is 335 in (8,509 mm) long and 103 in (2,617 mm) high with the 11 in (279 mm) Z-stroke, and 331 in (8,408 mm) long and 140 in (3,556 mm) high with the 18 in (457 mm) stroke.
The table has 5 vacuum zones as standard. On a surface this size the zones are large, so small parts cut near the end of a nest depend on good hold-down. Custom zones are offered. The standard head is one 18 hp (13.4 kW), 24,000 rpm spindle holding 12 tools.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 240 in (6,096 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 335 in (8,509 mm) with 11 in Z; 331 in (8,408 mm) with 18 in Z |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 103 in (2,617 mm) with 11 in Z; 140 in (3,556 mm) with 18 in Z |
| Vacuum Zones Standard | 5 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 11 in (279 mm); 18 in (457 mm) |
| Spindle Power Optional | 24 hp (17.9 kW) |
| Spindles Optional | Up to 4 |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 120 in (3,048 mm) of table Y: ten-foot sheet can lie crosswise
- 240 in (6,096 mm) of table X for two ten-foot sheets lengthwise
- Dual-drive gantry on one-piece steel columns
- 24 hp (17.9 kW) spindle and up to 4 spindles listed as upgrades
Limitations
- Machine width of 200 in (5,080 mm)
- 5 standard zones are large on a table this size
- Reaching the middle of a ten-foot-wide table by hand is awkward; plan the loading method
Best For
Frequently Asked Questions
01
240 in (6,096 mm) in X by 120 in (3,048 mm) in Y. In sheet terms that is a twenty-by-ten-foot surface, enough for four five-by-ten sheets or two ten-foot-square blanks.
02
It is 200 in (5,080 mm) wide. Length is 335 in (8,509 mm) and height 103 in (2,617 mm) with the 11 in Z-stroke; with the 18 in Z-stroke the figures are 331 in (8,408 mm) and 140 in (3,556 mm).
03
Onsrud's page describes one design for the series: one-piece vertical steel columns, a helical rack and a dual-drive system. It lists no separate construction for the wide tables, so ask the maker how the longer bridge is built.
04
The 240GW12 adds two feet of width, with 144 in (3,658 mm) of table Y and a 224 in (5,690 mm) frame. Choose it for twelve-foot stock. For ten-foot material the 240GW10 saves floor width and keeps the bridge shorter.
