ROMI VT 2000M
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Spindle Power
max turning diameter
max swing diameter
How much does the ROMI VT 2000M cost?
Price estimate
We do not have a price for the ROMI VT 2000M that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Wide, flat work is the territory of the ROMI VT 2000M. This vertical CNC lathe turns up to 2,200 mm (87 in) in diameter on a 2,000 mm (79 in) chuck, yet its maximum turning height is the same 1,500 mm (59 in) as on the smaller VT 1400M. Slewing rings, large flanges, gear rims and tyre moulds have that shape.
The table carries 15,000 kg (33,000 lbs). It is driven by two motors, listed as 2 x 42 hp / 2 x 31 kW, over a range of 1 to 250 rpm, and for heavy roughing there is a first range of 1 to 100 rpm. C axis torque is 39,000 Nm (28,765 lb-ft), which holds a part of this diameter steady while the ram spindle drills a bolt circle near the rim.
Reach across the table grows with the diameter: programmed X travel is 1,445 mm (57 in). The ram itself is unchanged, a 250 x 250 mm (9.8 x 9.8 in) section with 1,000 mm (39 in) of travel, an ISO 50 driven spindle running 3 to 3,000 rpm and a magazine of 20 tools. The cross rail is set in steps over 900 mm.
For the extra diameter the footprint grows only a little. The machine is 5.6 m (220 in) high, needs 8.7 x 5.7 m (342 x 224 in) of floor and weighs 43,000 kg (94,800 lbs). Rapids are 20 m/min (787 in/min). Linear roller guideways with an anti-vibration system carry the cross rail, the chuck is a 4-jaw cast iron unit, and programming is on a Siemens Sinumerik 840D sl.
Full Specifications
| Parameter | Value |
|---|---|
| Max Turning Diameter | 2,200 mm (87 in) |
| Max Swing Diameter | 2,200 mm (87 in) |
| Max Height Allowed | 1,650 mm (65 in) |
| Max Turning Height | 1,500 mm (59 in) |
| Rapid Traverse Z | 20 m/min (787 in/min) |
| Rapid Traverse X | 20 m/min (787 in/min) |
| Chuck Size | 2,000 mm (79 in) |
| Max Spindle Speed | 1 to 250 rpm |
| Spindle Speed Range 1 | 1 to 100 rpm |
| Max Weight on Chuck | 15,000 kg (33,000 lbs) |
| C Axis Torque | 39,000 Nm (28,765 lb-ft) |
| C Axis Speed | 0 to 2 rpm |
| Ram Travel | 1,000 mm (39 in) |
| Cross Rail Travel | 900 mm (6 x 150 mm) / 35 in (6 x 5.9 in) |
| X Axis Travel | 1,445 mm (57 in) |
| Ram Section | 250 x 250 mm (9.8 x 9.8 in) |
| Spindle Taper | ISO 50 |
| Driven Tool Speed | 3 to 3,000 rpm |
| Driven Tool Torque | 700 Nm (516.3 lb-ft) |
| Driven Tool Power | 40 hp / 31 kW |
| Tool Capacity | 20 |
| Spindle Motor Power | 2 x 42 hp / 2 x 31 kW |
| Machine Height | 5.6 m (220 in) |
| Floor Space | 8.7 x 5.7 m (342 x 224 in) |
| Machine Weight | 43,000 kg (94,800 lbs) |
| CNC Control | Siemens Sinumerik 840D sl |
Specifications sourced from romi.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Turns 2,200 mm (87 in) in diameter on a 2,000 mm (79 in) chuck
- Chuck load of 15,000 kg (33,000 lbs)
- C axis torque of 39,000 Nm (28,765 lb-ft)
- Programmed X travel of 1,445 mm (57 in)
- Driven ram spindle with ISO 50 taper and a 20-tool magazine
Limitations
- Turning height is 1,500 mm (59 in), no more than on the VT 1400M
- Top chuck speed drops to 250 rpm
- Ram travel is 1,000 mm (39 in), which limits deep bores
- Weighs 43,000 kg (94,800 lbs) and stands 5.6 m (220 in) high
Best For
Frequently Asked Questions
01
Maximum turning diameter is 2,200 mm (87 in), the same as the maximum swing diameter. Maximum turning height with the ram is 1,500 mm (59 in) and maximum height allowed 1,650 mm (65 in). The 2,000 mm (79 in) chuck takes up to 15,000 kg (33,000 lbs).
02
The speed range is 1 to 250 rpm, with range 1 from 1 to 100 rpm. Installed power is 2 x 42 hp / 2 x 31 kW, two motors acting on the chuck drive together.
03
Yes. The vertical ram has a driven tool with an ISO 50 taper, 3 to 3,000 rpm, 700 Nm (516.3 lb-ft) and a 40 hp / 31 kW motor. The C axis positions the table at 0 to 2 rpm with up to 39,000 Nm (28,765 lb-ft). The magazine holds 20 tools.
04
The VT 2500M is a taller machine: 2,100 mm (83 in) of turning height and 1,500 mm (59 in) of ram travel, with 25,000 kg (55,100 lbs) on the chuck. The VT 2000M stays at 1,500 mm (59 in) of turning height and is 5.6 m (220 in) high.
More from Romi
Other CNC Lathes / Turning Centers
Mazak QUICK TURN SMART 350
You Ji VTL1200ATC
Tsugami M06SY-II
Okuma LU4000 EX
